|
|
The F-14 is a
member of the successful F-series, and is a universal radio control system
designed as a tray transmitter. It features 5 option wells to take your
personal choice
of upgrades .The
Basic transmitter
comes as a 4 channel set
that
can be expanded to
106
channels by adding
decoders and modules .Please see at the bottom of the page for list of extras
for the F14 |
|
Further
features
|
| |
Trainer
socket; well for Trainer Module 4 in front face for teacher-student operations with
virtually any ROBBE-Futaba transmitter. |
5th option well now takes Multi-Modules with
8 controls.
| |
Servo reverse
and programmable control function sequence. |
| Large battery compartment for batteries up to
3000 mAh-gives
more then 12 hours of operation. |
|
Charge socket and integral aerial compartment as standard. |
| Single-point transmitter support lug; unit can also be
mounted in a transmitter tray. |
|
High-power frequency-modulated
RF section for high-level operational reliability. |
F-14 set
|
Part No
|
Contents
|
Qty
|
|
|
F4039
|
F-14 transmitter, 40 meg
|
1
|
|
|
|
R-118F receiver
|
1
|
|
|
|
S 148 servo
|
1
|
|
|
|
Servo accessories pack
|
1
|
|
|
|
Switch harness with charge socket
|
1
|
|
|
|
Pair of crystals
|
|
|
|
|
Total cost for set
|
£129.99 |
F-14 set
|
Part No.
|
Contents
|
Qty
|
|
|
F4014
|
F-14 transmitter, 40 meg
|
1
|
|
|
|
R-118F receiver
|
1
|
|
|
|
S 148 servo
|
3
|
|
|
|
Servo accessories pack
|
3
|
|
|
|
Switch harness with charge socket
|
1
|
|
|
|
Transmitter Nicad 1400ma
|
1
|
|
|
|
Receiver Nicad 1400ma
|
1
|
|
|
|
Transmitter/Receiver charge leads
|
2
|
|
|
|
Pair of crystals
|
1
|
|
|
|
Total cost for set
|
£199.99
|
F-14/Navy Expansion Modules and Accessories
Part No.
|
Contents
|
Qty
|
Cost
|
|
F1511 |
Multi-Switch 8 Module
This module is designed for controlling auxiliary functions, and expands one
proportional channel on the transmitter to provide 8 switched functions. |
1
|
£57.99 |
|
F1513 |
Multi-Switch 8 Decoder
For each Multi-Switch module in the transmitter you need one decoder at
the receiver.
The decoder takes up only one servo channel, and can switch 8 channels
directly. Operating voltage 4.8 - 12 V, max. 1.2 A per output.
Set includes 8 connecting leads, F 1439. |
1
|
£159.99 |
|
F1512 |
Multi-Prop 8 Module
This module is designed for controlling auxiliary functions, and
expands one proportional channel on the transmitter to provide 8 proportional
functions. It provides accurate, simultaneous control of 8 channels. |
1
|
£54.99 |
|
F1516 |
Multi-Prop 8 Decoder
This module is designed for controlling auxiliary functions, and
expands one proportional channel on the transmitter to provide independent
control of 8 servos or speed controllers.
Operating voltage 4.8 - 6 Volts.
Set includes 8 x F 1439 connecting leads |
1
|
£134.99 |
|
F8039 |
Multi-Prop 4 + 4 Module
With 4 switches and 4 rotary controls.
Ideal for all applications where your transmitter lacks one proportional
channel, e.g. for a Crane, Monitor, etc. |
1
|
£49.99 |
|
F8042 |
Multi-Prop 4 + 4 Decoder
For each Multi-Prop module in the transmitter one decoder is required at the
receiver end. Same decoder as No. F 1516, but without connecting leads. |
1
|
£89.99 |
|
F8084 |
Multi-Switch 16 Module
This module is designed for controlling auxiliary functions, and expands one
proportional channel on the transmitter to provide 16 switched functions. |
|
£63.99 |
|
F8369 |
Multi-Switch
16 Decoder Memory
Can switch 16 channels directly. Operating
voltage 4.8 - 24 Volts, up to 1.8 A per output.
Now with Memory Function: both channels assigned to a single switch can
be turned on simultaneously. The memory function can be switched off at any
time
The output stage of this decoder features protection against short-circuit,
reverse polarity and overheating, making it virtually indestructible. Set
supplied without connecting leads. |
1
|
£92.99 |
|
F8101 |
Multi-Switch 12 + 2 Prop Module
Optional module for controlling auxiliary functions; expands one proportional
channel on the transmitter to provide 12 switched functions and 2 proportional
servo channels.
This is a combination module which covers most requirements. |
1
|
£56.99 |
|
F8370 |
Multi-Switch 12 + 2 Prop Decoder
For each Multi-Switch module in the transmitter you need one decoder at the
receiver end. This takes up only one servo channel, and can switch 12
channels directly as well as providing 2 servo channels. Operating
voltage 4.8 - 24 Volts, up to 2.7 A per output.
Now with Memory Function: both channels assigned to a single switch can be
turned on simultaneously. The memory function can be switched off at any time.
The Multi-Switch-Prop decoder can also process the switched functions of the
8-channel and 16-channel modules.
The output stage of this decoder features protection against short-circuit,
reverse polarity and overheating, making it virtually indestructible. Set
supplied without connecting leads. |
1
|
£92.99 |
|
F8305 |
Genoa Module
Module for controlling foresails such as the Genoa or Blister on model sailing
boats. Direction of running and trim values can be adjusted separately;
variable trim travel. The Genoa module is designed to be installed in the
transmitter’s central option well. |
1
|
£49.99 |
|
F1500 |
Switchable 3 Pos Switch
Expands the F-16 transmitter by one 3-position switched channel. |
1 |
£10.99 |
|
F1601 |
Proportional Channel Linear
Expands the F-14 or FC-16
transmitter by one slider channel with centre |
1 |
£17.99 |
|
F1600 |
3 Position Switched Channel
|
1
|
£16.99 |
|
F1601 |
Proportional Channel Linear
|
1
|
£17.99 |
|
F1541 |
Dual-Rate Module
For limiting the servo travel of 2 control functions within the range 30-100%.
To switch the function off you need a mixer switch, e.g. F 1502. |
1
|
£28.99 |
|
F1540 |
Mini-Option Mixer Module
Module mixes two control functions, e.g. V-tail, combi-mixer, delta, with
variable mix ratio. To switch the function off you need a mixer switch, e.g. F
1502. |
1
|
£54.99 |
|
F1502 |
Mixer Switch 2 Pos
For F-14 to FC-28 transmitters. Used to switch mixed functions on and off |
1 |
£9.99 |
|
F1503 |
Mixer Switch 3Pos Same as above but with center off |
1 |
£9.99 |
|
F1504 |
2
Pos Mixer Switch Large
As 1502 but with large switch lever |
1 |
£9.99 |
|
8270 |
Navy Sound Module
A sound module for model boats, containing six digitally stored original
sounds. At any time a signal can be superimposed on the engine noise
simultaneously, such as the Martins horn, foghorn, ship’s bell, typhoon or
destroyer siren, without interrupting the sound of the diesel engine.
The diesel engine sound varies according to the speed of the drive motor, and
features start-up and run-down sound phases. The sound module features an
integral 8-channel multi-switch decoder which is used to switch the
individual sounds on and off.
A further two multi-switch switched channels are available for any purposes
you wish, and can be used for direct control of auxiliary functions drawing
up to 1 A (lights, anchor winch etc.). All inputs and outputs are protected
against short-circuit and reverse polarity.
The sound module can be used with the earlier 6-channel and the current
8-channel Robbe Multi-Switch modules, and also with other makes of similar
unit. A powerful, high-volume amplifier stage provides distortion-free
reproduction, and the volume is infinitely variable.
A Multi-Switch module must be installed in any Robbe Futaba system
transmitter to control the sound effects. |
1 |
£124.99 |
|
F1297 |
F14 Transmitter Nicad 9.6v,1400ma
|
1
|
£26.99 |
|
F1307 |
F14 Receiver Nicad 4.8v,1400ma
|
1
|
£14.99 |
|
F1542 |
F14
Replacement option well covers |
1Pr |
£3.25 |
|
F1499 |
F-14 Cover Plate, 8 controls
|
1
|
£7.50 |
|
F1562 |
F-14 Cover Plate, 6 controls
Module cover with label areas, designed to fit the bottom transmitter option
well. For modules with 6 physical controls |
1
|
£9.99 |
|
