|
|
|
|
These kits have moulded ABS hulls and superstructure, and glues and a modelling knife are included. These kits are ideal for the beginner except for the Thames barge, which does require some previous model making experience. |
HF1 |  |
Type 23 Frigate
Designed for 2 channel Radio Control and using
a 6volt. NiCad's the prototype ran for over an hour. With the addition of scale fittings the frigate can be turned into a very attractive model |
£89.50 | HF6 |
 | ThunderFlash has been designed for you to enter the exciting sport of fast electric powerboat racing. With its low cost and short building time we have designed the ThunderFlash to utilise readily available equipment as found in buggies and electric cars.
Formed in high impact styrene the kit contains deck and hull mouldings in high impact styrene, motor mount, servo tray, ni-cad tray, rudder support, brass rudder, propshaft and propeller, (decals not included | £33.95 | HF2 |  |
The type of barge represented in this kit would have been sailing since the end of the 19th Century. With many still being used to the present day for racing and pleasure use. They were built around the Thames estuary in the South East of England where they worked. The design and sailing characteristics were designed so as to be sailed by a crew of a man and a boy. They could carry loads of around 70 to 90 tons, making them very efficient forms of transport in the days when transport was usually poor. The kit is designed to include many of the original crafts characteristics. The control of all six sails will give you very realistic sailing performance and, whether sailing close hauled or on a run, she will amaze you with her speed and maneuverability.
Kit includes: 24 formings; numbered hull; deck; cabin; movable leeboards with planking detail; servo tray; rudder with planking detail; receiver and battery box; 6 ballast boxes; 2 removable keels; 43 screen printed components; 40 fittings including the anchor and brail winches; all spars and mast timber; sail cloth; knife; cement; full instructions | £110.95 | HF7 |
 | Pilot Boat,
If you have never built a radio controlled boat before, then this is the kit for you. One of the most popular kits in the range, based on the well known Nelson 40 Pilot boats, this model has the same sea keeping characteristics as well as the same functional looks. You will be able to sail long after everyone else has been blown off. With its keel, the Pilot boat is an excellent regatta and steering boat with a very short box to pond time.
Kit includes: hull with rubbing strake detail; deck with anti slip moulding; cabin with raised window detail; two crew seats; rudder support; motor; motor coupling; motor mount; prop and shaf | £65.95 | HF3 |  |
The 590S is a second generation 590 yacht, redesigned for the 90's with a modern ocean racer style.
This kit, also in addition to the proven sailing qualities of the 590D, features a full cabin and deck moulding, together with screen printed windows, skylights, instrument panel, compass, compass, large numbers and letters. Designed for 2 channel Radio Control, no expensive sail winch is required | £75.95 | HF9 |
 | Quick build for the beginner, a challenge to detail for the expert. The Ocean Going Tug is designed for heavy weather being very stable but also maneuverable. Additional detail can be added by using 1:72 scale fittings.
Kit includes: 70 formings; detailed hull; fore and aft decks; bridge wings; anchor winch; superstructure; detailed lifeboats and davits; modelling knife; cement; motor; shaft; coupling; brass rudder | £69.95 | HF4 |
 |
The 590D has established itself as one of the most popular sailing yacht kits of recent years. With its proven one design racing record you can enjoy fast and close racing on any water. Designed for 2 channel Radio Control.
Kit includes: numbered hull formed in high impact styrene; full and storm sails; 2 part alloy mast and alloy booms; tiller arm; line; hooks & eyes; screws; keel and keel weight; full instructions and class racing rules; modeling knife and cement | £67.95 | HF10 |
 | This Anchor Handling / Tug / Oil Rig Supply vessel is a very popular kit allowing you to make four different classes of vessel, simply by rearranging the superstructure and funnels. A very attractive boat can be made by the addition of some commercial fittings.
Kit includes: detailed hull moulding in high impact styrene; two types of funnels; fixed kort nozzle; rudder; knife; styrene cement; wire; screws; motor mount; full instructions | £66.95 | HF5 |  |
Day Boat
Based on the popular Pilot boat hull, this boat is also a delight to build. Ideal for the beginner, it is a proven regatta and steering boat and will be stable in all weather. The kit can be built in two versions: Police / Customs / Harbormaster launch, (twin engine casings with single cabin door). Fishing / Day boat, (single engine casing with twin cabin doors).
Kit includes: hull with rubbing strakes; detailed deck moulding; servo and receiver box; cabin interior with seats; self bailing aft cockpit; motor | £65.95 | HF11 |
 | Deep Dive VI is designed to be an inexpensive introduction to the world of model submarines. Once the formings are cut out, only eight gluing operations are needed as the rest is simply bolted together. All the workings are in the bottom of the hull so access is no problem. Using the 385 motor provided with 6 x 1200ma cells, the Deep Dive VI will run for up to 40 minutes. Designed for 2 channel Radio Control operation, using a micro-switch. (Movable bow planes, rudder and forward power on the micro-switch) Front vane control is used to achieve stable and constant depth keeping. With multi-channel Radio Control, full forward and reverse operation can be achieved.
Kit includes: hull formings in Research Yellow high impact styrene; quick access radio box; rudder; dive vanes; servo trays; 385 motor; propshaft; motor coupling; brass and stainless wire; all nuts and bolts; full instructions | £86.95 |
|
|
