Bow Thrusters

Online Catalogue | Model Boat Accessories |  Bow Thrusters

Convert

Choose an alternate currency

Robbe Bow Thruster 1155Robbe Bow Thruster 1155 Ref: 3467
Rugged bow thruster set featuring a new high-performance wheel-type design. The efficient shaft seal allows also horizontal installation. Supplied with electric 4.8-6V motor, suppressor filter and hardware. This will need a revercerble electronic switch or speed controller for the motor Click here to see suitable ESC
Specification:
Height: 112 mm
Maximum width.: 155 mm
Tube diameter: 28 mm

Price:£34.58 (Including VAT at 20%)

Quantity:  

Raboesch Bow Thruster 108-03Raboesch Bow Thruster 108-03 Ref: 4691
These very powerful bow thrusters are supplied fully mounted with a Power 400 7.2-Volt electrical motor. The propulsion is provided by a flat propeller (pedal)
which pressurises the water through jet nozzles whereby the entire assembly functions as a pump. This design is very robust and very stable and requires
the very little maintenance. The pump housing and the extension tubes are made of ABS (acrylonitrile butadiene styrene). The motor is sealed with a G-ring and an
O-ring which prevents the entry of water whereby the bow thruster can be installed vertically as well as horizontally. The motor with the pump housing cover can be
removed easily. The cover has an O-ring that ensures water-tight sealing of the entire assembly. For further technical information: See the dimensional drawing and
the technical details of the motor.

Spec : Voltage 6 - 7.2volt : Hight 66mm : Tube Length 57mm :Tube Dia 22mm

Price:£30.95 (Including VAT at 20%)

Quantity:  


People who bought this item also bought:
1. Flex-I-File Flex-Pad Intro Set (Ref: 4882)
2. Flex-I-File Combo Set (Ref: 4876)
3. Milliput Epoxy Putty 4oz - Standard (Ref: 4693)
4. Plastic Weld (Ref: 2376)
Raboesch Bow Thruster 108-04Raboesch Bow Thruster 108-04 Ref: 3465
These very powerful bow thrusters are supplied fully mounted with a Power 400 7.2-Volt electrical motor. The propulsion is provided by a flat propeller (pedal)
which pressurises the water through jet nozzles whereby the entire assembly functions as a pump. This design is very robust and very stable and requires
the very little maintenance. The pump housing and the extension tubes are made of ABS (acrylonitrile butadiene styrene). The motor is sealed with a G-ring and an
O-ring which prevents the entry of water whereby the bow thruster can be installed vertically as well as horizontally. The motor with the pump housing cover can be
removed easily. The cover has an O-ring that ensures water-tight sealing of the entire assembly. For further technical information: See the dimensional drawing and
the technical details of the motor

Spec : Voltage 6 - 7.2volt : Hight 72mm : Tube Length 55mm :Tube Dia 25mm


Price:£32.45 (Including VAT at 20%)

Quantity:  

Raboesch Bow Thruster 108 - 30Raboesch Bow Thruster 108 - 30 Ref: 4690
Raboesch Bow thruster unit with motor 30mm I/D 33mm O/D

for use with 6v to 7.2v motor Uses two 3 blades props, which Generates a lot power than other thrusters .
Ideal For use in Larger models

Length of the motor housing: 48 mm. Total length: 148 mm. Total height: 65mm. Weight 150 gr


Price:£73.96 (Including VAT at 20%)

Quantity:  


People who bought this item also bought:
1. Anchor - Aero-Naut/ EN5621/50 (Ref: 64)
2. Anchor - Aero-Naut/ EN5621/30 (Ref: 62)
3. Mtroniks 155.0mm (6.0 inch) 60W splashproof speaker (Ref: 4683)
4. Rigging Line 0.4mm Pt No 1685 (Ref: 3315)
Graupner Bow Thruster 1785Graupner Bow Thruster 1785 Ref: 3455
7.2 V. Plastic case with flange-mounted electric motor SPEED 400 and two extension tubes.
Diameter of inlet/outlet tube 14 mm.
Length of extension tubes approx. 60 mm each. O.a.
width of tube center section plus extensions approx. 165 mm.
Total heigh incl. motor approx. 65 mm.

Price:£28.55 (Including VAT at 20%)

Quantity:  

Online Catalogue | Model Boat Accessories |  Bow Thrusters


Best Sellers

  1. Imperial Depth Markings (Ref: 1800)
  2. Vinyl Lettering (Ref: 1806)
  3. Single Brass Block Brass Sheave (Ref: 4537)
  4. Raboesch Universal Joint (Ref: 2802)
  5. MicroViper Marine10 - MicroViper Marine10 (Ref: 2705)
  6. Graupner 2 Bladed M4 Threaded Hydro Prop (Ref: 2910)

New Products

  1. 6ch FM40 (N) M2 R136F S3003 x 4 (Ref: 4946)
  2. 6.0v 5000mAh Ni-MH Rx Pk Flat (Ref: 4945)
  3. Fairmile D M.G.B. Royal Navy Motor Gun Boat. (Ref: 4944)
  4. Fairmile ASRL/MGB WWII. Royal Air Force Air Sea Rescue Launch.1:32nd (Ref: 4943)
  5. E Phyllis II American Harbour Tug. 1:24th (Ref: 4942)
  6. Cygnus SF33 1:16 (Ref: 4941)
  7. Cygnus SF33 1:12th (Ref: 4940)
  8. Cygnus Revenge 38 Fast Fishing Boat 1:12th (Ref: 4939)