Brushless Speed Controllers

Online Catalogue | Model Boat Accessories | Brushless Speed Controllers

Convert

Brushless Speed Controller

Brushless Electronic Speed Controllers for use in the model boat world.
Including Forward only and Also With Reverce Depending on your requirments .
Please Call On 44 (0)1202 763480 If you need help on this .

Hawk BL 18A Nimh 6 to12 Li 2 to 4 Reversible Brushless Esc Ref: 1870
* Compact and light weight
* 'Cool Power' FET technology
* Safe Start, prevents the motor starting accidentally
* Low Voltage Cut-Off (programmed from the battery selection that you make in the set up procedure - NiCd, NiMH, Li-Po)
* Designed in conjuction with the Fusion brushless motors, but can be used with any brushless motor
* Advanced programming possible with the optional programmer

The following can be programmed without the optional programmer

Programme:
Battery Type Li-Po / NiCd / NiMH
Direction of Rotation Normal/Reverse
Brake (AIR) On / Off
Governor (Heli) On / Off
Reverse (Car, Boat) On / Off
Model Type (Air/Heli) Aircraft / Helicopter
Model Type (Boat/Car) Boat / Car
Load Current 18A
Peak Load 22A
Load Dimention (mm) 38x22x7
Weight (g) 25g
NiCd/NiMH 6~12
Li-Po Cell No. 2~4
BEC 5.5V
Programmable Yes
Rx Filter Yes
PCOYes
POR Yes
hec 32 kHz
TP Yes

Price:£35.99 (Including VAT at 20%)

Quantity:

People who bought this item also bought:

1. Program card for BL Range - Rclodgic/prog-card (Ref: 1879)

Hawk BL 30A HV Nimh 6 to 18 Li 2 to 6 With ReverseLi 2 to 6 With Reverse Ref: 1871
The 900 series is a further development of the proven Tornado BL series, and now offers a range of new functions which make these speed controllers equally suitable for use in model aircraft, boats and electric helicopters.# The new functions: Programmable forward / reverse function, ideal for model boat applications.
# Governor mode, optionally programmable with or without speed regulator: perfect for micro and mini electric helicopters.
# Plug-in programming card for simple and unambiguous function set-up.# Additional features: Can be set for use with in-runner and outrunner motors; LED indicator.
# Brake can be programmed on and off.
# High pulse frequency (32,000 Hz) for ultrafine speed control, e.g. for ""torque-rolls"".
# Integral temperature guard protects the controller from thermally induced damage.
# Designed for 6 .. 12 NC / NiMH or 2 ... 4 LiPo cells.
# Programmable low-voltage cut-off.
# Like all robbe speed controllers, these units are fitted with the usual protective and filter functions, including POR power-on guard and RX filter.
# Designed specifically to match the series of BL motors, but can also be used with other brushless motors.
# Programmable basic functions: NC / NiMH or LiPo battery type
# Motor direction left, right, forward / reverse
# Brake On / Off
# Model type select: fixed-wing, boat or helicopter
Specification:
#Weight: 29 g
#Momentary: 35.00 A
#Dimensions: 56 x 25 x 10 mm BEC: 5 Volt/max. 2 A
# Auxiliary functions (only with the programming card,No. 8633) Cut-off voltage NC / NiMH: 6 .. 7 cells = 0.9 V / cell 8 ... 12 cells = 7.2 Volt 2 LiPo: 5.5 Volt 3 LiPo: 8.3 Volt 4 LiPo: 11 Volt
# Cut-off mode
# Motor timing
# Acceleration
# Start power
# Brake power
# Governor (speed regulator mode)

Price:£40.84 (Including VAT at 20%)

Quantity:

Hawk BL 50A HV Nimh 6 to 18 Li 2 to 6 With Reverse Ref: 1872
The outstanding feature of the newly developed 900-series of speed controllers is their versatility: they can be used in virtually all areas of modelling: as forward / reverse controllers for RC model cars and boats, as unbraked controllers for racing boats, as model aircraft speed controllers with variable brake, and even for electric helicopters - optionally with and without speed governor mode. The 900 generation of speed controllers can do everything - and at a very reasonable price# The new functions: Programmable forward / reverse function, ideal for model boat applications.
# Plug-in programming card for simple and unambiguous function set-up.
# Additional features: Can be set for use with in-runner and outrunner motors; LED indicator.
# Brake can be programmed on and off.
# High pulse frequency (32,000 Hz) for ultrafine speed control, e.g. for “torque-rolls”.
# Integral temperature guard protects the controller from thermally induced damage.
# Designed for 6 .. 18 NC / NiMH or 2 ... 6 LiPo cells.
# Programmable low-voltage cut-off.
# Like all robbe speed controllers, these units are fitted with the usual protective and filter functions, including POR power-on guard and RX filter.
# Designed specifically to match the series of BL motors, but can also be used with other brushless motors.
# Programmable basic functions: NC / NiMH or LiPo battery type
# Motor direction left, right, forward / reverse
# Brake On / Off
# Model type select: fixed-wing, boat or helicopter
Specification: Weight: 29g Momentary: 60.00 A Dimensions: 66 x 25 x 10 mm BEC: 5 Volt/max. 3 A

Price:£49.99 (Including VAT at 20%)

Quantity:

Hawk BL 60A HV Nimh 6 to 18 Li 2 to 6 With Reverse Ref: 1873
he outstanding feature of the newly developed 900-series of speed controllers is their versatility: they can be used in virtually all areas of modelling: as forward / reverse controllers for RC model cars and boats, as unbraked controllers for racing boats, as model aircraft speed controllers with variable brake, and even for electric helicopters - optionally with and without speed governor mode. The 900 generation of speed controllers can do everything - and at a very reasonable price# The new functions: Programmable forward / reverse function, ideal for model boat applications.
# Plug-in programming card for simple and unambiguous function set-up.
# Additional features: Can be set for use with in-runner and outrunner motors; LED indicator.
# Brake can be programmed on and off.
# High pulse frequency (32,000 Hz) for ultrafine speed control, e.g. for “torque-rolls”.
# Integral temperature guard protects the controller from thermally induced damage.
# Designed for 6 .. 18 NC / NiMH or 2 ... 6 LiPo cells.
# Programmable low-voltage cut-off.
# Like all robbe speed controllers, these units are fitted with the usual protective and filter functions, including POR power-on guard and RX filter.
# Designed specifically to match the series of BL motors, but can also be used with other brushless motors.
# Programmable basic functions: NC / NiMH or LiPo battery type
# Motor direction left, right, forward / reverse
# Brake On / Off
# Model type select: fixed-wing, boat or helicopter
Specification: Weight: 29g Momentary: 70.00 A Dimensions: 66 x 25 x 10 mm BEC: 5 Volt/max. 3 A
.

Price:£59.99 (Including VAT at 20%)

Quantity:

Hawk 75A HV Nimh 6 to 18 Li 2 to 6 With Reverse Ref: 1874
New From Fusion the Hawk 75Amp .
Ideal for Fast Electric or scale Boats .
Fully Programable .
Full Proportional Forward and Reverse Inc Brake on or Off.
Works with Inrunner and Outrunner Brushless motors .

Spec :
Nicad 14-36 cells
Lipo 4- 12 Cell
Load Currant 75Amp
Peak 85Amp
thermal Protection
Motor Fequency 32Khz

Dimentions : 78mm x 29 x 14mm Wheight 75g

Price:£112.33 (Including VAT at 20%)

Quantity:

Hawk BL 100A OPTO Nimh 14 to 36 Li 4 to12 With Reverse Ref: 1868
New From Fusion the Hawk 100Amp .
Ideal for Fast Electric or scale Boats .
Fully Programable .
Full Proportional Forward and Reverse Inc Brake on or Off.
Works with Inrunner and Outrunner Brushless motors .

Spec :
Nicad 14-36 cells
Lipo 4- 12 Cell
Load Currant 100Amp
Peak 120Amp
thermal Protection
Motor Fequency 32Khz

Dimentions : 78mm x 51 x 36mm Wheight 75g

Price:£121.54 (Including VAT at 20%)

Quantity:

Hawk BL 120A OPTO Nimh 14 to 36 Li 4 to12 With Reverse Ref: 1869
New From Fusion the Hawk 100Amp .
Ideal for Fast Electric or scale Boats .
Fully Programable .
Full Proportional Forward and Reverse Inc Brake on or Off.
Works with Inrunner and Outrunner Brushless motors .

Spec :
Nicad 14-36 cells
Lipo 4- 12 Cell
Load Currant 120Amp
Peak 150Amp
thermal Protection
Motor Fequency 32Khz

Dimentions : 78mm x 51 x 36mm Wheight 166g

Price:£132.76 (Including VAT at 20%)

Quantity:

Program card for BL Range - Rclodgic/prog-card Ref: 1879
Program card for the Hawk Range of ESC''s

Price:£18.37 (Including VAT at 20%)

Quantity:

People who bought this item also bought:

1. Hawk BL 18A Nimh 6 to12 Li 2 to 4 Reversible Brushless Esc (Ref: 1870)

Hydra HV-60 - Hydra HV-60 Ref: 1878
Castle Hydra controllers already own the record books, why stop there? Introducing the incredible water cooled Hydra HV series controllers for marine use. DOUBLE (50 volts max) the voltage capacity of the standard Hydra (25 volts max) means that marine guys can put twice as much power into the water!

Check out the power thesemonsterscanhandle. Of course, all Castle Hydra controllers are compatible with our optional Castle Link software and USB Programming Kit (sold separately) in order to tune parameter such as the throttle curve, reversing behavior, voltage and amperage cutoffs and much more!

Please note that the Hydras are intended to run a single motor only. There are multiple input and output wires, as a single 10 gauge wire is not enough to carry this much current.

Voltage up to : 50V
Amps :60
Watts : 3000
Hourspower : 4
Length: 3.3" (83mm)
Width: 1.6" (41mm)
Height: 0.6" (15mm)
Weight with 4.75" wires: 3.2 oz (90g)
Throttle Connection: Opto Isolated
Castle Link Compatible: Yes

Price:£175.99 (Including VAT at 20%)

Quantity:

Hydra HV-120 - Hydra HV-120 Ref: 1875
Castle Hydra controllers already own the record books, why stop there? Introducing the incredible water cooled Hydra HV series controllers for marine use. DOUBLE (50 volts max) the voltage capacity of the standard Hydra (25 volts max) means that marine guys can put twice as much power into the water!

Check out the power thesemonsterscanhandle. Of course, all Castle Hydra controllers are compatible with our optional Castle Link software and USB Programming Kit (sold separately) in order to tune parameter such as the throttle curve, reversing behavior, voltage and amperage cutoffs and much more!

Please note that the Hydras are intended to run a single motor only. There are multiple input and output wires, as a single 10 gauge wire is not enough to carry this much current.

Amps 120
Watts : 6000
Hourspower 8
Length:3.3" (83mm)
Width:1.6" (41mm)
Height:0.6" (15mm)
Weight with 4.75" wires: 3.2 oz (90g)
Throttle Connection:Opto Isolated
Castle Link Compatible: Yes

Price:£220.00 (Including VAT at 20%)

Quantity:

Hydra HV-180 - 4982 Ref: 1876
Castle Hydra controllers already own the record books, why stop there? Introducing the incredible water cooled Hydra HV series controllers for marine use. DOUBLE (50 volts max) the voltage capacity of the standard Hydra (25 volts max) means that marine guys can put twice as much power into the water!

Check out the power thesemonsterscanhandle. Of course, all Castle Hydra controllers are compatible with our optional Castle Link software and USB Programming Kit (sold separately) in order to tune parameter such as the throttle curve, reversing behavior, voltage and amperage cutoffs and much more!

Please note that the Hydras are intended to run a single motor only. There are multiple input and output wires, as a single 10 gauge wire is not enough to carry this much current.

Amps : 180
Watts : 9000
Horespower : 12
Length:3.3" (83mm)
Width: 1.6" (41mm)
Height: 1.3" (33mm)
Weight with4.75" wires: 6.8 oz (193g)
Throttle Connection: Opto Isolated
Castle Link Compatible: Yes

Price:£280.00 (Including VAT at 20%)

Quantity:

Hydra HV-240 - Hydra HV-240 Ref: 1877
Castle Hydra controllers already own the record books, why stop there? Introducing the incredible water cooled Hydra HV series controllers for marine use. DOUBLE (50 volts max) the voltage capacity of the standard Hydra (25 volts max) means that marine guys can put twice as much power into the water!

Check out the power thesemonsterscanhandle. Of course, all Castle Hydra controllers are compatible with our optional Castle Link software and USB Programming Kit (sold separately) in order to tune parameter such as the throttle curve, reversing behavior, voltage and amperage cutoffs and much more!

Please note that the Hydras are intended to run a single motor only. There are multiple input and output wires, as a single 10 gauge wire is not enough to carry this much current.

Amps :240
Watts :1200
Horespower : 16
Length: 3.3" (83mm)
Width: 1.6" (41mm)
Height: 1.6" (41mm)
Weight with 4.75" wires:7.7 oz (230g)
Throttle Connection: Opto Isolated
Castle Link Compatible: Yes

Price:£329.00 (Including VAT at 20%)

Quantity:

Castle Link Lead - Castle Link Lead Ref: 1866
Castle Link lead for Programing you Castle Hydra Esc directly from your pc

Click to Get Castle Software for use with Link Lead

Price:£21.98 (Including VAT at 20%)

Quantity:

Graupner Speed Controller Cooler Pt No 3329 - Graupner Speed Controller Cooler Pt No 3329 Ref: 1867
Water-cooler for speed controllers Just cable tie to the none cooled unit for extra cooling

Price:£7.00 (Including VAT at 20%)

Quantity:

ENERG PRO MARINE 60 SBEC ESC (60A) Ref: 1864
EnErG Pro 60 WATER COOLED MARINE
Continuous - 60A (Burst - 80A)
Weight - 64g
Size - 31x46x16mm
Lipo Cells - 2-6 (NiMH Cells - 5-18)
BEC Output - 5.5V/3A
Programmable - Yes (Manually or by Program card not included)

Price:£61.19 (Including VAT at 20%)

Quantity:

Online Catalogue | Model Boat Accessories | Brushless Speed Controllers

**sRecentPrefix**				<br/><br/><div class="recenththeader"><input class="recenthtbuttonright" id="scrollbackrecent" type="button" value="    Next >>" onclick="ScrollBackRecent();"><input class="recenthtbuttonleft" id="scrollforwardrecent" type="button" value="<< Previous" onclick="ScrollForwardRecent();"><div style="text-align:center">Recently Viewed</div></div><br clear="all"/><table id="recenthtitem"> **sRecentImageRowPrefix**	<tr><td class="recenthtitemspacer" rowspan=4> </td> **sRecentImageItem**			<td class="recenthtitemimage"><a _HREF_="_SSURL_?PRODREF=_PID_&NOLOGIN=1" ><img border="0" width="75" src="_THUMB_" alt="_NAME_" /></a></td><td class="recenthtitemspacer" rowspan=4> </td> **sRecentImageRowSuffix**	</tr> **sRecentDescRowPrefix**	<tr> **sRecentDescItem**			<td class="recenthtitemdesc"><a _HREF_="_SSURL_?PRODREF=_PID_&NOLOGIN=1" >_NAME_</a></td> **sRecentDescRowSuffix**	 **sRecentPriceRowPrefix**	<tr> **sRecentPriceItem**			<td class="recenthtitemprice">_PRICE_</td> **sRecentPriceRowSuffix**	</tr> **sRecentDeleteRowPrefix**	<tr> **sRecentDeleteItem**		<td class="recenthtitemdelete"><a href="javascript:DeleteRecent('_PID_', true);"><img src="xit.jpg" border="0" /></a></td> **sRecentDeleteRowSuffix**	</tr> **sRecentSuffix**				</table> **sRecentEmptyList**

Brushless Speed Controllers

Convert

Brushless Speed Controller

Best Sellers

New Products