Convert

Choose an alternate currency

Graupner Radio Systems

A small range from The Graupner Nautic Radio Series .These radios can be expanded by using the nautic moduals and switches To give an radio that will grow as your requirements grow

Graupner MX-12 HoTT Combo Ref: 3194 With 6 control functions, the mx-12 HoTT lets the advanced RC model builder to control numerous models. The use of Graupner HoTT 2.4-GHz transmission technology ensures great functional reliability through bidirectional communication between transmitter and receiver, with integrated telemetry, voice output via headphone output, and ultrafast response times. The transmitter has 10 model memories. Programming by keys. A contrast-rich, 8-line, blue-lit graphic display ensures perfect display of all setting parameters and telemetry data. Telemetry data and additional model memories can be stored on a micro-SD memory card. (later after update) The channel signal is resolved at 12 bits in 4096 steps, thus providing extremely sensitive control. USB connector for reading out and storing model memories and for firmware upgrades. Voice output via headphone output is available as an option. Microcomputer remote control system with state-of-the-art 2.4 GHz Graupner HoTT technology Bidirectional communication between transmitter and receiver 5 different languages (German, English, French, later Italian, and Spanish) possible via software update. For availability of the respective language, see Download area. Servo cycle times of 10ms can be selected for digital servos Ultrafast response times through direct transmission of the data from the main processor to the 2.4-GHz transceiver with reliable transmission. No additional delays through detours via a module processor Short aerial, foldable Operation and programming based on the proven concepts of mc-19 to mc-24 A contrast-rich, 4-line, blue-lit graphic display ensures perfect control of settings and parameters such as model type, model memory, clocks, and operating voltage 6 control functions Free assignment of all switches 10 model memories 4 switches/keys, including 2 3-stage-switches, 1 2-stage switch, 1 key Modes 1 to 4 are freely selectable Key lock function to prevent unintentional operation Display change from main menu to telemetry main menu using the ESC key Numerous telemetry display, programming, and analysis functions directly in the transmitter display 3 flight phases can be programmed Extensive programmes for fixed-wing and helicopter models Swashplate limiter Servo travel adjustment: can be set separately for all servo channels and for each final value Sub-trim to set the neutral position of all servos 2-stage expo/dual-rate system, individually adjustable, can be switched during flight Mixer functions Programmable failsafe function »Hold« or »Advance to pre-set positions« adjustable separately for each individual servo channel Stop watches / countdown timers with alarm function Model copy function for model memories The set includes: Graupner HoTT mc-12 microcomputer telemetry transmitter with built-in NiMH 1500 mAh transmitter battery, Graupner HoTT GR-12 receiver, and 200mA transmitter charger General HoTT features: Simple, extremely fast binding Range test and warning function Low-voltage warning Extremely broad receiver operating voltage range from 3.6 V to 8.4 V (functional to 2.5V) Failsafe, free channel allocation (channel mapping); mixer functions and all servo settings can be programmed simply with the HoTT-Smartbox Binding of any number of receivers for channel expansion (max. of 32 channels) Up to 4 servos can be controlled simultaneously as a block with a signal repetition time of 10 ms (only digital servos!) Maximum immunity to interference through optimised frequency hopping and broad channel spread Intelligent data transmission with correction function Extremely fast rebinding, even at max. distance Telemetry analysis in real time Over 200 systems can be used simultaneously Future-proof through update capability via USB interface Specification Dimensions (LxWxH) 190 x 175 x 115 mm Operating voltage 3,4 ... 6.0 V Frequency 2400 ... 2484,5 MHz All-up weight, approx. 770 g Range approx. 4000 m Charging rate 150 mA Temperature range -15 ... 55 °C Aerial length 120 mm  in stock. OUT OF STOCK Price:£173.92 (Including VAT at 20%) Quantity:

Graupner MX-16 HoTT, 8 c Combo Ref: 3195 Description: With 8 control functions, the mx-16 enables the advanced RC model builder to control nearly any model. The use of Graupner HoTT 2.4-GHz transmission technology ensures great functional reliability through bidirectional communication between transmitter and receiver, with integrated telemetry, voice output via headphone output, and ultrafast response times. The transmitter has 20 model memories. Programming through simplified programming technology with touch switches. A contrast-rich, 8-line, blue-lit graphic display ensures perfect display of all settings, parameters, and telemetry data. Telemetry data and additional model memories can be stored on a micro-SD memory card. (later after update) The channel signal is resolved at 12 bits in 4096 steps, thus providing extremely sensitive control. USB connector to read out and store model memories and for firmware upgrades. Microcomputer remote control system with state-of-the-art 2.4 GHz Graupner HoTT technology Bidirectional communication between transmitter and receiver 5 different languages (German, English, later French, Italian, and Spanish) possible via software update. For availability of the respective language, see Download area. Servo cycle times of 10ms can be selected for digital servos Ultrafast response times through direct transmission of the data from the main processor to the 2.4-GHz transceiver with reliable transmission. No additional delays through detours via a module processor Short aerial, foldable Operation and programming based on the proven concepts of mc-19 to mc-24 A contrast-rich, blue-lit graphic display ensures perfect control of settings and parameters such as model type, model memory, clocks, and operating voltage 8 control functions Free assignment of all switches 20 model memories 7 switches/keys, including 2 3-stage-switches, 3 2-stage switches, 2 keys, 3 analogue switches already installed Modes 1 to 4 are freely selectable CAP-TOUCH key with key lock function to prevent unintentional operation CAP-TOUCH display change from main menu to telemetry main menu using the ESC key Numerous telemetry display, programming, and analysis functions directly in the transmitter display 4 flight phases can be programmed Extensive programmes for fixed-wing and helicopter models Swashplate limiter Servo travel adjustment: can be set separately for all servo channels and for each final value Sub-trim to set the neutral position of all servos 2-stage expo/dual-rate system, individually adjustable, can be switched during flight Mixer functions Programmable failsafe function »Hold« or »Advance to pre-set positions« adjustable separately for each individual servo channel Stop watches / countdown timers with alarm function Model copy function for model memories The set includes : Graupner HoTT mc-16 microcomputer telemetry transmitter with built-in NiMH 2000 mAh transmitter battery, Graupner HoTT GR-16 receiver, and 100mAtransmitter charger General HoTT features: Simple, extremely fast binding Range test and warning function Low-voltage warning Extremely broad receiver operating voltage range from 3.6 V to 8.4 V (functional to 2.5V) Failsafe, free channel allocation (channel mapping); mixer functions and all servo settings can be programmed simply with the HoTT-Smartbox Binding of any number of receivers for channel expansion (max. of 32 channels) Up to 4 servos can be controlled simultaneously as a block with a signal repetition time of 10 ms (only digital servos!) Maximum immunity to interference through optimised frequency hopping and broad channel spread Intelligent data transmission with correction function Extremely fast rebinding, even at max. distance Telemetry analysis in real time Over 200 systems can be used simultaneously Future-proof through update capability via USB interface Specification: Temperature range : - 15 ... 55 °C Aerial length: 120 mm All-up weight, approx.: 770 g Frequency : 2400 ... 2483,5 MHz Range approx. : 4000 m Dimensions (LxWxH): 190 x 175 x 115 mm Charging rate : 150 mA Operating voltage : 3,4 ... 6,0V V  in stock. OUT OF STOCK Price:£299.99 (Including VAT at 20%) Quantity:

Graupner MX-20 HoTT 2.4 Gig Combo Ref: 3196 Description : The mx-12 gives ambitious RC model builders low-cost access to computer-controlled remote-control technology. The transmitter has 10-model memory, programming through simplified programming technology with toggle and cutoff switches. Great functional safety through the use of Graupner's HoTT 2.4 GHz technology. Bidirectional communication between transmitter and receiver with the ability to connect a telemetry box to the transmitter. Microcomputer remote control system in state-of-the-art 2.4 GHz Graupner HoTT technology Bidirectional communication between transmitter and receiver Modes 1 to 4 are freely selectable Extensive programmes for surface and helicopter models Short aerial, foldable 10-model memory accomodates all important program parameters and settings Contrast-rich, 4-line multi-data display MONITServo channel monitor for 6 servos MODEL NAME and model number seprately programmable DSC socket for connection of a flight simulator Alarm system for transmitter and back-up lithium battery The set includes: Graupner HoTT mx-12 microcomputer transmitter with built-in NiMH transmitter battery, Graupner HoTT GR-16 receiver, switch cable. HoTT-features: Simple, extremely fast binding Range test and warning function Low-voltage warning Extremely broad receiver operating voltage range from 3.6 V to 8.4 V (functional to 2.5V) Failsafe, free channel allocation (channel mapping); mixing functions and all servo settings can be programmed simply with the HoTT-Smartbox Binding of any number of receivers for channel expansion (maximum of 32 channels) Up to 4 servos can be controlled simultaneously as a block with a signal repetition time of 10 ms (only digital servos!) Maximum immunity to interference through optimized frequency hopping and broad channel spread Intelligent Data transmission with correction function Extremely fast rebinding, even at maximum distance Telemetry analysis in real time Over 200 systems can be used simultaneously Future-proof through update capability via USB interface MX-12 COMPUTERSYSTEM 2,4 GHz Order number 4754 Specification: Control function: 6 Funktionen, 4 trimmbar Temperature range : -15 ... +55 °C All-up weight, approx.: mit Senderbatterie 880 g Frequency : 2400 ... 2483,5 MHz Range approx. : 4000 m Dimensions (LxWxH): 195 x 190 x 85 mm Modulation: FHSS Operating voltage : 9,6 ... 12 V  in stock. OUT OF STOCK Price:£399.00 (Including VAT at 20%) Quantity:

Gps Verio Module For the Mx Hott Series Ref: 4499 Vario with altitude signals and 5 climb/drop signals each Additional warning thresholds for minimum altitude, maximum altitude, climb/drop speed in two stages Altitude display and storage of minimum and maximum altitude GPS with distance measurement, route measurement, speed display, display of flight direction and coordinates Warning time can be set to: OFF, 5, 10, 15, 20, 25, 30 seconds, always Warning repeat time can be set to: always, 1, 2, 3, 4, 5 minutes, once The GPS/Vario sensor can be connected directly to the telemetry output of the receiver Important Note when using the modules 33600, 33601, 33610, 33611 and 33620: Do not carry out any programming work on the sensors while the model is flying, otherwise there is a real risk that your model will fly out of control while you are not concentrating on it! If your model is fitted with two or more receivers, it is absolutely essential that you do not carry out programming work during a flight, as this can alter the settings in the receivers to which no telemetry equipment is connected; in the worst case this could result in the model crashing! For this reason always carry out programming on the ground, and check that only the receiver with connected sensors is powered on. Vario technical data: Altitude measurement: -500 ... +3000 m Resolution: 0.1m Sensitivity of Vario: 0.5 m / 3s, 1 m / 3 s, 0,5 m / s, 1 m / 1 s, 3 m / s per ton programmable Calculation of mean: 4 - 20 measurements per measured value can be programmed Specification Dimensions (LxWxH)38 x 30 (45) x 16 mm Operating voltage 3,6 ... 8,4 V All-up weight, approx. 20g  in stock. OUT OF STOCK Price:£90.00 (Including VAT at 20%) Quantity:

Electric Air Module 2-14S, Vario HoTT Pt No 33620 Ref: 4707 Description: General sensor for Graupner HoTT receiver and models with electric motor. Functions: " Vario with altitude signals and climb/drop signals plus additional warning thresholds for minimum altitude, maximum altitude, climb/drop speed in two stages " Altitude display (- 500 ... + 3000 m) and storage of minimum and maximum altitude " 2x temperature and voltage measurements with warning thresholds for min/max voltage and min/max temperature " Single cell measurement 2 ... 14S with warning threshold for minimum voltage " Voltage, current, and capacity measurement with warning thresholds for min/max voltage, max capacity, and max current " Current limiting programmable " Measurement of the current with shunt resistors 2x 0.2 mOhm (5 W) parallel = 0.1 mOhm " Warning time can be set to: OFF, 5, 10, 15, 20, 25, 30 seconds, always " Warning repeat time can be set to: always, 1, 2, 3, 4, 5 minutes, once Connections and Technical data Vario: " 2x temperature; optionally selectable from 0 to either 120°C or 200°C and voltage measurement to 60 V DC " 1x speed controller input, 1x speed controller output for single cell undervoltage regulation " 1x current, voltage, and capacity measurement up to 150 A (320 A for 1 s)and up to 60 V DC " 1x single-cell monitoring for 2 - 14S lithium batteries (LiPo, LiIo, LiFe) " 1x telemetry connection for receiver Specification Dimensions (LxWxH): 51 x 47 x 18 mm Operating voltage : 3,6 ... 8,4 V  in stock. OUT OF STOCK Price:£64.98 (Including VAT at 20%) Quantity:

Graupner Computer system 40 MHz Pt No 4719 Ref: 3193 Description: Twenty model memories Synthesizer channel select with security menu to avoid the transmitter being switched on accidentally Selectable modulation types: SPCM, PCM 20, PPM 18, PPM 24 Twelve control functions: simplified method of assigning control elements such as primary sticks, external switches, proportional controls and trim levers as transmitter control functions for multi-function model boats and cars, without the need to install external switches or switch modules Future-proof: update-capable operating system 3-D Rotary Encoder in conjunction with four programming buttons for easy, convenient and accurate setting of values MULTI-DATA GRAPHIC LCD monitor: high screen resolution for accurate monitoring and precise graphic display of curves and characteristic lines Real Time Processing (RTP): settings and changes take place virtually in real time ADT (Advanced Digital Trim System) CONVENIENT MODE SELECTOR: simple method of switching stick modes 1 - 4 (e.g. throttle right / throttle left) Three freely programmable mixers for RC model aircraft, helicopters, boats, cars and trucks Three-point mixers for throttle, collective pitch and tail rotor, plus gyro offset. These settings can be entered separately for each flight phase Dual Rate / Expo for Ch2 - Ch4 (switchable in common for each channel) Phase trim according to model type: camber-changing flaps, ailerons, elevator Comprehensive mixer menu with twelve set-up programs Servo travel settings for twelve servos, servo reverse, servo centre, servo travel, variable separately for each side, graphic display for all servos Fail-Safe programmable for PCM / SPCM Two switch-operated timers, stopwatch and Total time / running time HELP BUTTON with notes relating to the currently selected programming menu Trainer system with total control transfer; all settings entered at the Teacher transmitter Nautic control function for operating the Nautic Expert module Model copy function for all model memories Set contents: mc-19 micro-computer transmitter with integral NiMH transmitter battery, transmitter RF module on the appropriate frequency, C 17 miniature narrow-band FM receiver on the same frequency band, C 577 servo, switch harness, pair of crystals on the appropriate frequency band. Specification: Transmission system: SPCM 20 / PCM 20 / PPM 18 / PPM 24 selectable RF module: Integral transmitter Synthesizer module (35 / 35 B-band, 40 / 41 MHz band) Channel spacing: 10kHz Control functions: SPCM= 10, PCM= 10, PPM= 9, PPM 24= 12 Basic control functions: 6 functions Control channels: 10 (4 proportional with trims, 6 proportional or switched) plus 2 software control functions Channel pulse width: 1.5 ms + 0.5 ms Servo travel resolution: SPCM 20 10-bit (1024 steps), PCM 20 9-bit (512 steps) Temperature range: - 15 ... +55°C Telescopic aerial: 10-section, approx. 1470 mm long Operating voltage: 9.6 ... 12 V Current drain approx. 40 mA (excl. RF module) Dimensions approx. 225 x 215 x 70 mm  in stock. OUT OF STOCK Price:£550.46 (Including VAT at 20%) Quantity:

Graupner MC- 22s Computer System 40 MHZ Ref: 3192 Product information Micro-computer radio control system exploiting the latest technology for up to 10 control functions (SPCM) (PPM 24: 12 control functions). Multi- function menu for RC fixed-wing model aircraft, helicopters, boats and cars / trucks Professional high-technology micro-computer radio control system. With Ultra-Speed Low-PowerSingle-Chip Micro-Computer, 256 kByte (2Mbit) flash memory, 16 kByte (128 kbit) RAM, 73 ns operating cycle! With integral high-speed precision A/D converter and new type of dual-function encoder with 3-D Rotary Select programming technology. - World's first: four-language dialogue menu (German, English, French, Italian) - The latest hardware and integrated Synthesizer system for channel selection, with security menu to prevent the user switching the transmitter on accidentally - 12 control functions (PPM 24). Simplified assignment of sticks, external switches, proportional controls and trim levers as control functions - Update-capable operating system for a future-proof transmitter - 30 model memories, the latest back-up system requiring no Lithium battery - Dual-function encoder in conjunction with four programming buttons for accurate settings and superb programming convenience - CONVENIENT MODE SELECTOR for easy switchingbetween stick modes 1 - 4 (e.g. throttle right / throttle left) - High-resolution MULTI-DATA GRAPHIC LCD screen ensures accurate monitoring and precise graphic display of multi-point curves for throttle, collective pitch, tail rotor, EXPO / DUAL RATE and mixer characteristic curves. - Real Time Processing (RTP). All settings and changesare effective at the receiver output virtually in real time. ADT Advanced Digital Trim system for all four stick trim functions, with easily changed throttle / idle trim. Specification : Transmission system: SPCM 20 / PCM 20 / PPM 18 / PPM 24, switchable Synthesizer RF section: 35 / 35 MHz B-band or 40 / 41 MHz band Channel spacing, Synthesizer: 10 kHz Control functions, max. SPCM = 10 / PCM = 10 PPM = 9 / PPM 24 = 12 Control functions, standard: 6 functions, 4 with trims Channel pulse width: 1.5 ms + 0.5 ms Telescopic aerial: 10-section, approx. 1470 mm long Operating voltage: 9.6 ... 12 V Current drain approx. 40 mA (excl. RF module) Dimensions approx. 225 x 215 x 70 mm Weight approx. 900 g Sets Contents : mc-22s micro-computer transmitter with integral NiMH transmitter battery, six control functions, expandable to max. ten channels, Synthesizer RF module on the appropriate frequency band, R16SCAN PLL Synthesizer FM receiver on the corresponding frequency (8 servo functions), one C 577 servo, switch harness.  in stock. OUT OF STOCK Price:£689.36 (Including VAT at 20%) Quantity:

GR-16 Receiver For use with the Mx Hott Series Ref: 4498 The GR-16 receiver can control up to 8 servos With the GRAUPNER HoTT 2.4 GHz technology, the receiver has a new hopping telemetry transmission high-frequency unit with state-of-the-art components and the latest software. A hardware antenna diversity system always switches to the better antenna signal and for transmission always uses the antenna that was last used for receiving. This ensures that the back channel data are always sent via the better-positioned antenna. Without additional sensor systems, the parameters receiver voltage and temperature, as well as signal strength are transmitted. The use of up to 75 channels ensures extreme operating reliability and immunity to external interference. The broad reception voltage range of 3.6 V - 8.4 V (functional to 2.5 V) ensures full functionality even when voltage fluctuates. Two LEDs signal operating status. The sizes and weights have been reduced. Receiver input sensitivity and thus the range have been increased further. Servo connections in the front panel. Failsafe, hold, OFF, and standard (channel 1 failsafe; all others hold) programmable. Important Note: If your model is fitted with two or more receivers, it is absolutely essential that you do not carry out programming work e.g. with the Smart-Box during a flight, as this alter the settings in all connected receivers and this can lead to incorrect settings; in the worst case this could result in the model crashing! For this reason always carry out programming on the ground, and make sure that only the programmable receiver is powered on. Functions with SMART-BOX: 3 mixers programmable Linear, degressive, and exponential programming of servo curves SUM signal programmable at the output of the highest channel Limitation and reversal of servo travels also possible in receiver Failsafe, hold, and OFF programmable individually for the servo channels Warning thresholds programmable for undervoltage, excess temperature, and low temperature Specification Dimensions (LxWxH) 46 x 21 x 14 mm Frequency 2400 ... 2483.5 MHz All-up weight, approx. 12 g Modulation 2.4 GHz FHSS Range approx. 4000 m Charging rate 70 mA Temperature range - 15...+70 °C Operating voltage (2,5) 3,6 ... 8,4 V Aerial length 2 x Draht 145 (Antenne 30) mm Servo test function  in stock. OUT OF STOCK Price:£83.99 (Including VAT at 20%) Quantity:

Graupner Eco Winch Pt No 5173 Ref: 3189 Product information : Low-cost version of the popular REGATTA high-performance sailwinch. Suitable for general use in small to medium-sized sailing boats such as the SAPHIR and similar models. Robust plastic gearbox Powerful electric motor Modern IC power electronics Variable winding travel BEC system Specification : Operating voltage 4.8/6 - 7,2 V Torque approx. 45 Ncm/6 V Speed 1.2 sec/rev Winding range 1.5-5.5 rev Winding travel 12 to 43 cm Drum O 25 mm BEC system 5.5 V/0.5 A Dimensions approx. 46 x 42 x 23 mm (excl. flange) Weight approx. 70 g  in stock. OUT OF STOCK Price:£66.37 (Including VAT at 20%) Quantity:

Graupner Sailwinch 4 Pt 3772 Ref: 4852 Description : This sailwinch has been completely revised electronically and mechanically, and now features high tensile power and rapid winding speed. The unit provides very accurate proportional control of sail settings. After removing the cover on the rear of the case it is possible to adjust the sailwinch's travel within the range approx. 3½ to 8½ turns. The winch features a self-locking gearbox, i.e. wind pressure cannot possibly alter the sail positions or cause increased current drain when the motor is not running. A separate 4 ' 9 V power source with G3.5 connectors is required to operate the unit. Winding drums of different diameter (19 mm and 29 mm), the progressive aluminium cable drum and the option of using the 9 mm Ø shaft as a winding drum make the winch particularly versatile, as it can easily be set up to the exact travels and tensile forces required. Specification : All-up weight, approx.: 160 g No-load current drain, approx. : 250 mA Dimensions (LxWxH): 102 x 51 x 48 mm Neutralimpuls: 1,5 ms Max. Ansteuerfrequenz: 20 / 50 ms / Hz  in stock. OUT OF STOCK Price:£104.96 (Including VAT at 20%) Quantity:

16 Channel Nautic Module Pt No 4108 Ref: 3188 Product information : This module expands two channels to 16 switch channels. All of the eight switches have a center position, a feature which provides true forward-stop-reverse steering. Three of the switches are self-neutralizing at both sides, two of them at one side only. Two of these modules can be installed at the transmitter with a total of 32 switching functions at module stations A and B. At the receiver one 2-/16-channel NAUTIC-EXPERT switch module (No. 4159) has to be provided.  in stock. OUT OF STOCK Price:£140.94 (Including VAT at 20%) Quantity:

Graupner Nautic Prop Module Pt No 4141 Ref: 3199 Product information: The module extends a proportional 2-channel function to eight channels. It may be installed at the module stations A and B of the transmitter FM 4014, FM 414 and D 14 SSM and at all four module stations A, B, C and D of the FM 6014 transmitter. For the receiver the NAUTIC multi- prop decoder (No. 4142) is necessary.  in stock. OUT OF STOCK Price:£85.78 (Including VAT at 20%) Quantity:

Graupner Nautic expert Block 4159 Ref: 3197 Product information: By retrofitting the transmitter with a NAUTIC-EXPERT module No. 4108 and equipping the receiver with up to two NAUTIC-EXPERT switch modules, the equipment can be extended to 32 switch channels. If the connecting leads are suitably wired, the consumers may be supplied either off a common power supply or separately off several ones.  in stock. OUT OF STOCK Price:£117.44 (Including VAT at 20%) Quantity:

Graupner Mc 22 Naurtic Addapter Pt No 4184.4 Ref: 3191 This adaptor is used to connect NAUTIC Multi-Prop modules, No. 4141, NAUTIC-Expert modules, No. 4108, to the mc-24 and mc-22* transmitter. The jumpers supplied must be fitted to the NAUTIC modules in the transmitter.  in stock. OUT OF STOCK Price:£7.66 (Including VAT at 20%) Quantity:

Graupner Prop Decoder Pt No 4142.N Ref: 3198 Product information: The NAUTIC Multi-Prop decoder expands one proportional channel to provide four proportional servo functions in combination with a Multi-Prop module (Order No. 4141.1) fitted to the transmitter. If the Multi-Prop decoder is connected to the appropriate receiver servo socket, three extra servos can be used for each Multi-system decoder.  in stock. OUT OF STOCK Price:£93.41 (Including VAT at 20%) Quantity: