Mantua

Online Catalogue | Static wooden Model Boat Kits  |  Mantua

Convert

Choose an alternate currency

Mantua is part of three kit companies Matua ,Panart , Sergal .All products are now made in one factory. These kits are in our opinion make for a very good range of static kits. The kits themselves consists of wooden laser cut Frames in a beach ply with lime and walnut planking. Along with high detailed metal castings normally gilded brass . The hulls tend to be double planked with the inner binging lime so as to give the shape of the hull the outer binging a thin walnut plank to give the form .These kits also come with good plan sets and English instructions. And also very in skill level from Beginner to expert alike . If you are unsure as to which kit to buy then please call or drop us an Email and we will do are best to sort the right model out for you
Titanic Parts 1 - 5
Titanic Parts 1 - 5
Ref: 4891
Part One :Titanic 725 part 1.Scale 1:200 Length 1350mm. The Titanic is the flag ship of the Mantua model boats range.Mantua Model Group has decided to give place of importance in its collection of famous ships to the sea giant Titanic. We have selected a scale of 1:200 giving a hull dimension of 1350mm long and 140mm wide. This model comes in two versions static or RC. To give the customer the freedom of choice, we have divided the construction into 5 parts.You can purchase the complete set or individually as required.The kit comes in 5 parts the first being the hull & front and rear decks, the second is the motor pack if you want to install radio control, the third is hull & fore and aft decorations, the fourth is the middle decks including the funnels and the fifth is all the final fittings kit. Construction is generally plank on frame with laser cut and etched wooden details. English instructions and photographic details are included.

Scale 1:200
Length 1350mm

Part 2 :Titanic 726 second part. This second part contains two mabuchi motors with pulleys and transmission, the motor mounts and all the wooden plates, which are rubber backed to absorb vibration, together with all the linkages. To complete the control of this model you will need the radio equipment, power pack and speed controller. Balast also needs to be added to finish this stage.

Part 2.1:Titanic 726 second part. This second part contains two mabuchi motors with pulleys and transmission, the motor mounts and all the wooden plates, which are rubber backed to absorb vibration, together with all the linkages. To complete the control of this model you will need the radio equipment, power pack and speed controller. Balast also needs to be added to finish this stage.

Part 3:Titanic 727 part 3. The third part contains the stern railings, ladders, bow decks and all the hull mouldings, windows and bullseyes. This box contains very detailed and delicate laser cut and engraved work on birch marine plywood, which is very strong despite its fine thickness.

Part 4:Titanic 728. This fourth kit contains all the parts to build the upper decks, funnels, life boats with thier parrals and masts. All the decks are complemented with the walls of the cabins which are fully detailed with laser etched and cut windows and doors. The decks are planked with white maple strips and mahogany hand rails and stairs. The funnels are frame built to maintain a low weight for correct floatation. All the steam pipes are abs and have to be heated and bent into shape then painted in place. All rigging and stiffening ropes are fitted with hooks to allow easy access to the radio and motor compartment.

Part 5: Titanic 729. The fifth part completes this laser cut model. It contains all the upper skylights, the wind sleeves the parrals the windlass and stern scaffolds together with many other small decorations and parts. We recommend to all modellers to buy the special showcase (part 7310) to keep your fine model in pristine condition.




Choice
Titanic Part 1 Hull & Front and Rear Decks £246.00
Titanic Part 2 Motor Set £110.59
Titanic Part 3 Hull Fittings £136.99
Titanic Part 4 Upper Decks Funnels £299.80
Titanic Part 5 Skylights & Decorations £116.40


Quantity:  


771 Albatros American clipper
771 Albatros American clipper
Ref: 2653
A lovely model of the famous American clipper “Albatros”, built in the Baltimore shipyards. She was typical of the fast efficient small ships produced by the Americans at that time.
A plank on frame construction
kit contains
Building plans with general details English instructions, walnut or lime planking, wooden masts and spars, brass and walnut fittings, rigging cord and silk flags. All sheet ply sections are laser cut for accuracy.
Scale 1:40
Length 700mm
PART No 771


Price:£109.99 (Including VAT at 20%)


Quantity:  


Mantua Victory  Pt 720
Mantua Victory Pt 720
Ref: 2641
Victory 720, Scale 1:200, Length 620mm. This new victory kit, the fourth in the victory range, offers a splendid kit in a size that will grace any room with ease. It has all the latest laser cutting & etching including all the gun ports, decking and gratings, all being pre cut plywood. We have included in the kit the wooden/copper coloured laser sheet for a more realistic finish.
This kit makes up into a fine model of the flagship to Admiral Lord Nelson during the battle of Trafalgar on 21st October 1805 and is the most famous of the great British fighting ships. She can be visited at Portsmouth dockyard where she is preserved for posterity.A plank on frame construction, the kit contains:- Building plans with general details

Scale 1:200
Length 620mm

PART No 720


Price:£124.80 (Including VAT at 20%)


Quantity:  


732 Le Madeline French Fishing Boat
732 Le Madeline French Fishing Boat
Ref: 2642
A French fishing boat of Cacale,from the first years of 20th century.
The model is easy to build and suitable for a modeller with general experience.
Kit contains
all the wooden parts laser cut and is double planked, with wooden and metal fittings. A full assembly handbook with photographic details and step by step building sequence enclosed
Scale 1:50
Length 760mm
PART No 732


Price:£90.00 (Including VAT at 20%)


Quantity:  


733 Britannia Prince of Wales Royal Yacht
733 Britannia Prince of Wales Royal Yacht
Ref: 2643
Prince of Wales' Royal Yacht Britannia, 1893
Scale model of the famous Royal Yatch of the Prince of Wales, launched in 1893 with a length of 123' 6, about 36.5 metres. Mantua Ship kit.
Kit Contents
laser cut walnut planking and all fittings.
Scale 1:60
Length 830mm
PART No 733


Price:£143.53 (Including VAT at 20%)


Quantity:  


736 Bruma Ocean Going Fishing Boat
736 Bruma Ocean Going Fishing Boat
Ref: 2644
Scale reproduction of an ocean going fishing boat, converted into a pleasure yacht.
This is a plank on frame construction for radio control or as a fine display model.
The kit contains all the necessary wood parts, with the sheet ply being laser cut for accuracy, metal accessories, two shafts and propellers.
The motors are available as a separate items.
Scale 1:45
Length 860mm
PART No736


Price:£165.40 (Including VAT at 20%)


Quantity:  


753 Trotamares  luxury cruiser
753 Trotamares luxury cruiser
Ref: 2645
The Trotamares was built in Spain in 1958 and was later restored and transformed from a fishing boat to a luxury cruiser.
She is now chartered out of Monte Carlo dockyard.A plank on frame construction, the
kit contains
Building plans with general details English instructions, walnut or lime planking, wooden masts and spars, brass and walnut fittings, etched brass details, rigging cord and silk flag. All sheet ply sections are laser cut for accuracy.
Scale 1:43
Length 800mm
PART No 753


Price:£180.00 (Including VAT at 20%)


Quantity:  


754 Gorch Fock  German naval training vessel
754 Gorch Fock German naval training vessel
Ref: 2646
Gorch Fock following on in the great German tradition of naval training, has formed the base design for training ships in other countries.
A plank on frame construction.
kit contains
Building plans with general details English instructions, lost wax brass castings walnut or lime planking, wooden masts and spars, brass and walnut fittings, etched brass details, rigging cord. All sheet ply sections are laser cut for accuracy.
Scale 1:90
Length 980mm
PART No 754


Price:£271.19 (Including VAT at 20%)


Quantity:  


756 Nina part of the fleet commanded by Christopher Columbus
756 Nina part of the fleet commanded by Christopher Columbus
Ref: 2648
This little ship formed part of the fleet commanded by Christopher Columbus for his voyage of discovery in 1492. She was originally named Santa Clara but was nicknamed and became widely known as Nina.
A plank on frame construction,
kit contains
Building plans with general details English instructions, lost wax brass castings walnut or lime planking, wooden masts and spars, brass and walnut fittings, etched brass details, rigging cord, sailcloth and silk flag. All sheet ply sections are laser cut for accuracy.
Scale 1:50
Length 400mm
PART No 756


Price:£109.99 (Including VAT at 20%)


Quantity:  


755 Pinta Part of the Fleet of Cristopher Colombus
755 Pinta Part of the Fleet of Cristopher Colombus
Ref: 2647
The “Pinta” together with the Nina and the Santa Maria, formed the fleet for the voyage of discovery led by Christopher Columbus.
She was originally lateen rigged with one mast square rigged (caravela redonda) but was refitted just 10 days into the expedition leaving just the rear mast lateen rigged.
A plank on frame construction,
kit contains
Building plans with general details English instructions, lost wax brass castings walnut or lime planking, wooden masts and spars, brass and walnut fittings, etched brass details, rigging cord, sailcloth and silk flag.
All sheet ply sections are laser cut for accuracy.
Scale 1:50
Length 780mm
PART No755


Price:£109.99 (Including VAT at 20%)


Quantity:  


768 Black Falcon
768 Black Falcon
Ref: 2650
A reproduction of the type of two masted brig commanded by the infamous pirate captain William Kidd (1645-1701).
A plank on frame construction,
kit contains
Building plans with general details English instructions, lost wax brass castings walnut or lime planking, wooden masts
and spars, brass and walnut fittings and lifeboat, etched brass details, rigging cord, silk flag, printed sails. All sheet ply sections are laser cut for accuracy.
Scale 1:100
Length 456mm
PART No 768 m


Price:£109.99 (Including VAT at 20%)


Quantity:  


770 Caesar Roman Bireme - Mantua
770 Caesar Roman Bireme - Mantua
Ref: 2652
A nice model of a Roman bireme of the first century B.C.
It was in this type of ship that the Romans conquered the known world. A plank on frame construction.
kit contains
Building plans with general details English instructions, walnut or lime planking, wooden masts and spars, brass and walnut fittings, etched brass details, rigging cord, printed sails, tent and royal standard. All sheet ply sections are laser cut for accuracy.
Scale 1:30
Length 620mm
PART No 770


Price:£125.99 (Including VAT at 20%)


Quantity:  


773 Astrolabe typical French sloop
773 Astrolabe typical French sloop
Ref: 2654
A fine reproduction of a typical French sloop from the early 1800’s. this model was built up using plans obtained from the French Naval Museum of Paris.
A plank on frame construction.
kit contains
Building plans with general details, English instructions, lost wax brass castings walnut or lime planking, wooden masts and spars, brass and walnut fittings, etched brass details, rigging cord, sail canvas and silk flag. All sheet ply sections are laser cut for accuracy.
Scale 1:50
Length 1100mm
PART No 773


Price:£199.99 (Including VAT at 20%)


Quantity:  


774 Endeavour Captain Cook’s ship
774 Endeavour Captain Cook’s ship
Ref: 2655
This ship was originally built as a collier in Whitby and was bought and refitted by the Royal Navy in 1768.
The works included the addition of a further deck to provide cabin accommodation.
She was then re-launched under her new name “Endeavour” and went on to become famous as Captain Cook’s ship in his scientific journey’s of discovery. A plank on frame construction.
kit contains
Building plans with general details English instructions, lost wax brass castings walnut or lime planking, wooden masts and spars, brass and walnut fittings, etched brass details, rigging cord and silk flag. All sheet ply sections are laser cut for accuracy.
Scale 1:60
Length 810mm
PART No 774


Price:£171.60 (Including VAT at 20%)


Quantity:  


775 Santa Maria Flagship For Christopher Colombus
775 Santa Maria Flagship For Christopher Colombus
Ref: 2656
The Santa Maria was the flagship of the little fleet ( Nina & Pinta ) with which Christopher Columbus discovered The New World in 1492.
A plank on frame construction
kit contains
Building plans with general details English instructions, lost wax brass castings walnut or lime planking, wooden masts and spars, brass and walnut fittings, etched brass details, rigging cord, sailcloth and silk flag. All sheet ply sections are laser cut for accuracy.
Scale 1:50
Length 780mm
PART No 775


Price:£171.60 (Including VAT at 20%)


Quantity:  


776  H.M.S. Victory  Flagship to Admiral Lord Nelson
776 H.M.S. Victory Flagship to Admiral Lord Nelson
Ref: 2657
This kit makes up into a fine model of the flagship to Admiral Lord Nelson during the battle of Trafalgar on 21st October 1805 and is the most famous of the great British fighting ships.
She can be visited at Portsmouth dockyard where she is preserved for posterity.A plank on frame construction.
kit contains
Wood,Fittings,Lazer cut frames ,Building plans with general details
Scale 1:98
Length 1100mm
PART No 776


Price:£324.00 (Including VAT at 20%)


Quantity:  


777 Shine  English cutter
777 Shine English cutter
Ref: 2658
A lovely model of an English cutter built in 1712 at the Bermuda shipyards.
The second mast was a later addition to increase sail power and speed up the commercial connections with the East Indies.A plank on frame construction.
kit contains
Building plans with general details English instructions, lost wax brass castings walnut or lime planking, wooden masts and spars, brass and walnut fittings, etched brass details, rigging cord and silk flags. All sheet ply sections are laser cut for accuracy.
Scale 1:45
Length 670mm
PART No 777


Price:£148.99 (Including VAT at 20%)


Quantity:  


778 La Couronne
778 La Couronne
Ref: 2659
This Constuction kit is suitable for the expert & carefull modeller. The plan was drawn from the French period books. Standard plank on frame construction, utilising walnut, maple and lime woods.
Figure head, caryatids, angels & other onamentations in cast or pressed brass.
All dead eyes,blocks,etc in walnut. Flags printed on silk, standing & running in black & natural rope. All lanterns,cannon,anchors,hinges & strops made in metal. Fully detailed building plans with English instructions.
Scale 1:98
Length 760mm
PART No 778


Price:£309.60 (Including VAT at 20%)


Quantity:  


779 Uss Constitution 1797  known as Old Ironsides - Mantua/779 Uss Constitution
779 Uss Constitution 1797 known as Old Ironsides - Mantua/779 Uss Constitution
Ref: 2660
Lovely scale model of the American ship “Constitution”. After two abortive attempts, she
was finally launched on 31st. December 1797. She became known as ‘Old Ironsides’ and continued in service until 1897 when she was towed back to the scene of her launching in
Boston and remains there as an American shrine and museum. A plank on frame construction, the
kit contains
Building plans with general details English instructions, lost wax brass castings walnut or lime planking, wooden masts and spars, brass and walnut fittings, etched brass details, rigging cord and silk flag. All sheet ply sections are laser cut for accuracy.
Scale 1:98
Length 960mm
PART No 779


Price:£309.60 (Including VAT at 20%)


Quantity:  


797 Cannoniera Olandese Dutch Naval gun boat
797 Cannoniera Olandese Dutch Naval gun boat
Ref: 2661
This Dutch Naval gun boat took part in the bombardment of Antwerp against the Belgian insurgents.
The captain G. Van Speyk refused to surrender himself or his ship he blew her, together with the crew, from the water on February 5th. 1831. After this tragic event similar vessels were used in 1833 by the Royal Belgian Navy to guard the river Scheldt.
Scale 1:43
Length 760mm
PART No 797


Price:£198.00 (Including VAT at 20%)


Quantity:  


798 Le Superbe 74 gun French fighting ship
798 Le Superbe 74 gun French fighting ship
Ref: 2662
Lovely scale model of the famous 74 gun French fighting ship Le Superbe.
A plank on frame construction.
kit contains
Building plans with general details English instructions, lost wax brass castings walnut or lime planking, wooden masts and spars, brass and walnut fittings, etched brass details, rigging cord and silk flag. All sheet ply sections are laser cut for accuracy.
Scale 1:75
Length 1100mm
PART No 798


Price:£345.60 (Including VAT at 20%)


Quantity:  


799 Amerigo Vespucci Italian Naval sail training vessel
799 Amerigo Vespucci Italian Naval sail training vessel
Ref: 2663
Exact scale model of the famous school ship of the Italian Navy.
She was planned by lieutenant colonel Framcesco Rotundi following the trends of war sailing vessels. She was launched in 1931 at the Navy`s ship yards of Castellammare di Staia Naples.
kit contains
laser cut frames, kell, decks & all the wooden structures; all planks, masting, metal & wooden fittings, lost wax cast parts & brass Pphoto-etched accessories. Plan in full detail with 9 large sheets.
Scale 1:100
Length 1000mm
PART No 799


Price:£316.80 (Including VAT at 20%)


Quantity:  


769 Golden Star English Brigantine ( Brig )
769 Golden Star English Brigantine ( Brig )
Ref: 2651
Scale model of an English Brigantine ( Brig ), popular in the 17th. and 18th. centuries.
The kit is not too complicated and would suit the patient beginner to the fascinating hobby of model ship building.
A plank on frame construction.
kit contains
Building plans with general details English instructions, lost wax brass castings walnut or lime planking, wooden masts and spars, brass and walnut fittings, etched brass details, rigging cord, silk flag printed sails. All sheet ply sections are laser cut for accuracy.
Scale 1:150
Length 520mm
PART No 769


Price:£85.20 (Including VAT at 20%)


Quantity:  


757 Mercator  Belgium training ship
757 Mercator Belgium training ship
Ref: 2649
The Belgium training ship “Mercator” was launched in 1932 as part of the training programme for future officers and crew and was in service until 1960.
This splendid three masted vessel was transformed in 1961 into a museum and is open in the summer months in the Ostend shipyards. A plank on frame construction.
kit contains
Building plans with general details English instructions, lost wax brass castings walnut or lime planking, wooden masts and spars, brass and walnut fittings, etched brass details, rigging cord, and silk flag.
All sheet ply sections are laser cut for accuracy.
Scale 1:120
Length 640mm
PART No 757


Price:£162.00 (Including VAT at 20%)


Quantity:  


Online Catalogue | Static wooden Model Boat Kits  |  Mantua