Electronic Speed controllers

Online Catalogue | Model Boat Accessories |  Electronic Speed controllers

Convert

Choose an alternate currency

Mtronik Tio Marine15 - Mtronik Tio Marine15
Mtronik Tio Marine15 - Mtronik Tio Marine15
Ref: 2706
The tio Marine15 is a new Brushed Speed Control designed specifically for use in RC boats that allows for the use of Lipo battery packs as well as the usual NiCAD/NiMH/Lead Acid that are more commonly used.

The Marine15 has a 15Amp motor limit, what this means is that you can use any, DC Brushed motor, as long as the current drawn by that motor does not exceed 15Amps under load (with the prop connected, under water).

A break down of the tio Marine15 specification can be seen below

NEW built in failsafe to protect against complete loss of signal or when out of range (compatible with all manufacturers receivers)**INDUSTRY FIRST**
ABSOLUTE short circuit and motor overload protection
15Amp motor limit
1.2A BEC
5 -10 cells NiCad/NiMH input voltage (6.0-12.0V)
2 - 3 cells Lipo input volyage (7.4-11.1V)
Waterproof
Dimensions : L39.0mm x W34.0mm x H13.0mm
Weight : 55g


Price:£25.99 (Including VAT at 20%)


Quantity:  




People who bought this item also bought:
1. Insert 2.3mm Plain - Insert 2.3mm Plain (Ref: 2809)
2. Raboesch Universal Joint (Ref: 2802)
3. Raboesch alan Key (Ref: 2795)
Mtronik tio Marine30 - Mtronik tio Marine30
Mtronik tio Marine30 - Mtronik tio Marine30
Ref: 2707
The tio Marine30 is a new Brushed Speed Control designed specifically for use in RC boats that allows for the use of Lipo battery packs as well as the usual NiCAD/NiMH/Lead Acid that are more commonly used.

The Marine30 has a 30Amp motor limit, what this means is that you can use any, DC Brushed motor, as long as the current drawn by that motor does not exceed 30Amps under load (with the prop connected, under water).

A break down of the tio Marine30 specification can be seen below
NEW built in failsafe to protect against complete loss of signal or when out of range (compatible with all manufacturers receivers)**INDUSTRY FIRST**
ABSOLUTE short circuit and motor overload protection
30Amp motor limit
1.2A BEC
Dual core microprocessor
4 quadrant control for perfect slow speed maneuvers
Sealed lead acid battery (6 - 12V nominal) Fully charged 12V can be around 13.2Vwhich is ok.
5 -10 cells NiCad/NiMH input voltage (6.0-12.0V)
2 - 3 cells Lipo input volyage (7.4-11.1V)
Reverse disable (on/off)
Dimensions : L39.0mm x W34.0mm x H13.0mm
Weight : 55g


Price:£35.99 (Including VAT at 20%)


Quantity:  



MicroViper Marine10 - MicroViper Marine10
MicroViper Marine10 - MicroViper Marine10
Ref: 2705
MicroViper Marine10 The MicroViper Marine10 is a miniature Brushed Speed Control designed specifically for use in RC model boats. The Marine10 has 10Amp motor limit and has proportional forwards and reverse functions.
The MicroViper Marine10 is a miniature Brushed Speed Controller designed specifically for use in small scale, low power RC boats.
The MicroViper Marine 10 Has a very small footprint measuring just under 26.0mm square, making it seem even smaller is the fact that is only an incredible 9.0mm high!!
The MicroViper Marine10 is very powerful for it's small size, it has been designed to run up to a maximum of 10Amps, making it a perfect alternative or upgrade for any small, low power RC boat!
MicroViper Marine10 specification
* 10Amp motor limit
* Motor short protection
* Forwards, brake & reverse
* 1.0KHz drive frequency
* Adjustable reverse (incl. Disable)
* Adjustable brakes
* 4.8V - 12.0V input voltage
* 1.2A BEC
* Built in failsafe
* 26.0mm x 25.6mm x 9.0mm
* 100% Waterproof
* Weight - 23.0gThe MicroViper Marine10 comes with standard battery and motor connections fitted so it is easy to fit straight into any RC car install.


Price:£19.99 (Including VAT at 20%)


Quantity:  



People who bought this item also bought:
1. Blue Lamp Casing (Ref: 2733)
2. Mtronik Viper 15 Marine - Mtronik/Viper-15/Marine (Ref: 2708)
3. Robbe Mini Geared Motors (Ref: 2145)
4. Vinyl Lettering (Ref: 1806)
Mtronik Viper 15 Marine - Mtronik/Viper-15/Marine
Mtronik Viper 15 Marine - Mtronik/Viper-15/Marine
Ref: 2708
Viper Marine15
Forwards & Reverse Marine ESC
The series consists of forwards only, reversible & marine spec controllers handling every job you can
expect from the latest state of the art technology.

* NEW built in failsafe to protect against complete loss of signal or when out of range (compatible with all manufacturers receivers)**INDUSTRY FIRST**
* ABSOLUTE short circuit and motor overload protection
* 15A current limit
* 100% Waterproof
* 6-12Volts input voltage

£19.99



Price:£19.99 (Including VAT at 20%)


Quantity:  




People who bought this item also bought:
1. Blue Lamp Casing (Ref: 2733)
2. Vinyl Lettering (Ref: 1806)
3. Robbe Mini Geared Motors (Ref: 2145)
4. Imperial Depth Markings (Ref: 1800)
Mtronik Viper 20 Marine - Mtronik Viper 20 Marine
Mtronik Viper 20 Marine - Mtronik Viper 20 Marine
Ref: 2709
Viper Marine20
Forwards & Reverse Marine ESC
The series consists of forwards only, reversible & marine spec controllers handling every job you can expect from the latest state of the art technology.
* NEW built in failsafe to protect against complete loss of signal or when out of range (compatible with all manufacturers receivers)**INDUSTRY FIRST**
* ABSOLUTE short circuit and motor overload protection * 20A current limit
* 100% Waterproof
* 6-12Volts input voltage



Price:£26.00 (Including VAT at 20%)


Quantity:  



Mtronik viper 25 Marine - Mtronik viper 25 Marine
Mtronik viper 25 Marine - Mtronik viper 25 Marine
Ref: 2710
Viper Marine 25
Forwards & Reverse Marine ESC
The series consists of forwards only, reversible & marine spec controllers handling every job you can expect from the latest state of the art technology.
* NEW built in failsafe to protect against complete loss of signal or when out of range (compatible with all manufacturers receivers)**INDUSTRY FIRST**
* ABSOLUTE short circuit and motor overload protection * 20A current limit
* 100% Waterproof
* 6-12Volts input voltage



Price:£31.00 (Including VAT at 20%)


Quantity:  




People who bought this item also bought:
1. 2 ER 40Mhz - Futaba/2ER/40mhz (Ref: 3048)
2. Jane 1:20th - Robbe/Figure/jane/1600 (Ref: 2684)
3. James 1:20th - Robbe/figures/1605 (Ref: 2682)
4. Helmsman Standing 1:25th - Graupner/Figure-Helmsman/375.2 (Ref: 2681)
Mtronik Viper 40 Marine - Mtronik/ Viper 40/ Marine
Mtronik Viper 40 Marine - Mtronik/ Viper 40/ Marine
Ref: 2711
Viper Marine40 Forwards & Reverse Marine ESC
The series consists of forwards only, reversible & marine spec controllers handling every job you can
expect from the latest state of the art technology.

* NEW built in failsafe to protect against complete loss of signal or when out of range (compatible with all manufacturers receivers)**INDUSTRY FIRST**
* ABSOLUTE short circuit and motor overload protection
* 40A current limit
* 100% Waterproof
* 6-12Volts input voltage



Price:£47.00 (Including VAT at 20%)


Quantity:  



Jp Marine Brushed ESC 50amp with Reverse - Jp Perkins Blue ESC 5510135
Jp Marine Brushed ESC 50amp with Reverse - Jp Perkins Blue ESC 5510135
Ref: 2704
* Marine Water Proof 50A Brushed Speed Controller with Reverse
* Continuous Current - 50A Forward (20A Reverse)
* Maximum Current - 70A Burst
* Voltage - 7.2v to 12v (6-10 cells)
* BEC - 5v/1A Max
* Size - 42 x 47 x 13mm
* Weight - 85g with wires
* Heat Sink - Yes




Price:£26.99 (Including VAT at 20%)


Quantity:  



People who bought this item also bought:
1. Dead Eye 3.5mm Pkt 10 Walnut - 4808 (Ref: 127)
Electronize Type FR15 HVR - Electronize/Type FR15 HVR/15amp
Electronize Type FR15 HVR - Electronize/Type FR15 HVR/15amp
Ref: 2701
43HVR
Speed controllers are designed to extend the use of the control to faster and larger models with motors drawing up to 15 amp. continuous current. The basic design of the 10 amp. controls is retained whilst the power handling components are uprated.

Features

*Standard radio control servo signal (standard connector supplied)
*Smooth P.W.M. forward and reverse speed control
*Low loss Power MOSFET current switching
*Protection against reversed motor battery
*Adjustable balance for zero speed position
*Adjustable 'span' to match maximum speed to throttle stick travel
*6 to 24 volt motor battery operation (5.5 volt min.)
*All units available in DIY kit version
*Type 43HX and 43HVR *15 amp. continuous load rating.
*45 amp. short term stall rating. (continuous MOSFET rating)*
*5 volt regulator (BEC) for single battery operation.
*1 amp. regulator rating with overload protection.

Price:£35.64 (Including VAT at 20%)


Quantity:  



Electronize Type FR30 HX - Electronize/Type FR30 HX/30amp
Electronize Type FR30 HX - Electronize/Type FR30 HX/30amp
Ref: 2702
FR30HX
Is the first of a new range of microprocessor based speed controllers. The power of a
microprocessor has enabled us to improve even on the market leading 43 series controllers and include
many features not found on other controllers. The use of twin, ultra miniature 30 amp. rated automotive relays has allowed a genuine 30 amp. continuous rating.
The FR30HX also has a selectable operating mode, giving a choice of high, low or variable frequency.
Operating at low frequency gives better starting and low speed control, whereas high frequency gives smoother and more efficient high speed performance. The unique Electronize variable frequency mode
gives the best of both worlds. It's a best performance low frequency controller, a smooth mid-range controller and an efficient high frequency controller all at the same time.

Features
Standard radio control servo signal input. (standard connector supplied)
Smooth P.W.M. forward and reverse speed control.
Selectable operating mode.
Low frequency mode: 100Hz
Variable frequency mode: 10 to 1000Hz
High frequency mode: 2000Hz
Low loss Power MOSFET current switching. (Only 2.7 milli-Ohms)
Low loss heavy duty cables. (0.25mm2)
High current automotive relays designed specifically for high power motor control.
Precision pre-set neutral.
Adjustable speed range to match throttle stick travel or scale speed.
6 to 24 volt motor battery operation. (5.5 volt min.)
30 amp. continuous load rating in either direction.
90 amp. short term stall rating. (continuous MOSFET rating)*
540 amp. peak rating.

Price:£44.58 (Including VAT at 20%)


Quantity:  



Jeti 600 Navy - Jeti-600-navy
Jeti 600 Navy - Jeti-600-navy
Ref: 2703
The Jeti 600 Navy is one of the latest generation of speed controllers with auto set up for most transmitter types .
Uses this Esc will coupe with most higher power motors you can think of (not brushless though) ideal for those high performance speed boats with 10cells and over .
Also uses TOP Temperature Overload Protection if temp rises to 100/110 dec controller cuts out also puts out audible alarm tone
dimensions: 50 x 26 x 14 mm
weight: 23/40 g
continuous current:60 A
accu: 8 - 30 NiMh
brake: no

Price:£66.37 (Including VAT at 20%)


Quantity:  


Robbe Rocraft 120 up Navy - Robbe/ Rocraft 120 up Navy
Robbe Rocraft 120 up Navy - Robbe/ Rocraft 120 up Navy
Ref: 2713
Small, economically priced controller for model boats, capable of controlling motors of medium to high power
. The standard Rokraft 120 mP is very powerful, but this version can cope with even higher power
levels over long periods if the additional water cooling system is used. This is very important with model
boats equipped with high-capacity NC packs and lead-acid batteries. Suitable for 600, 700 and 1000
Power motors. Can also be used with the water cooling disconnected in this case the specification is
as for the Rokraft 120 mP.Acrylic lacquer seal for protection against splash damage.
Operating voltage: 6 - 12 Volts

Price:£81.43 (Including VAT at 20%)


Quantity:  



Robbe Navy Control 535 - Robbe/ Navy Control 535
Robbe Navy Control 535 - Robbe/ Navy Control 535
Ref: 2712
High-performance speed controller with forward stop reverse functions, for 600...700 size motors
or multi-motor models with 500-700 size motors; also for Pro, Sports and Ultra motors. Full forward reverse
control with high resolution,excluding unnecessary brake function. Expanded controller neutral point
with pre-programmed non-linear control curve for finer control when manoeuvring. The 1000 Hz pulse
frequency avoids motor damage and gives a smooth motor start. Galvanic separation (OPTO)
between motor and receiver power circuit prevents interference to the receiving system from brush sparking.
The integral ´Rx-Filter´ active interference suppression system shields the receiver from motor interference and suppresses invalid signals. With power-on guard and thermal overload protection.
Simple to adjust the speed controller using the ´eps´ easy programming system. With integral water cooling
system for long operating times at high load currents. Can also be used without water cooling;
maximum continuous current is then reduced to 25 A. Sealed with acrylic lacquer to protect from splash damage.
Specification:
Operating voltage: 6 - 17 Volts
Weight: 62g
Dimensions: 65 x 39 x 18.5 mm

Price:£120.00 (Including VAT at 20%)


Quantity:  



Robbe Rookie Truck Controller  Pt No 8407
Robbe Rookie Truck Controller Pt No 8407
Ref: 4598
A special-purpose speed controller for model trucks and other multi-function vehicles. Expanded zero point gives ultra-fine speed control. Non-linear control curve and high motor pulse frequency are specially designed to suit the motors generally used in trucks.
The controller is equipped with a generous heat-sink designed to cope with high load currents, even in the part-load range.

Full, high-resolution speed control in forward and reverse; no brake function in the neutral position, as this is a nuisance during precision shunting manoeuvres.

The speed controller features an integral Rx filter which suppresses brief interference and "glitches", and this is a further great advantage for close manoeuvring.
The unit includes a high-power BEC circuit which is capable of supplying the necessary power to multiple servos and auxiliary function modules (lighting set etc.).
Specification:
Weight: 60 g
Momentary: 45.00 A connector system: AMP
Dimensions: 41 x 45 x 28 mm BEC: 5 V, 1.2 A
more Specification:
Operating voltage:´5 - 10 NC with BEC or 6-12 V lead-acid battery
Lead-acid battery:´25 A
Functions: Forward, stop, reverse
Features: BEC, hec, eps, TP, POR, PCO, WP, Rx filter

Price:£70.99 (Including VAT at 20%)


Quantity:  


Online Catalogue | Model Boat Accessories |  Electronic Speed controllers