Sound Systems

Online Catalogue | Model Boat Accessories | Sound Systems

Convert

MTronik Digisound Large Multi Cylinder Air Start Diesel
Ref: 4462
The digiSOUND5m is the new marine sound module from Mtroniks Ltd. It is the worlds first 100% waterproof, plug n play sound module designed to take the hassle out of giving your model a realistic sound! The sound module requires NO programming or set up, it comes with a realistic sound pre-installed leaving just the installation to complete before you can get under way! The unit comes complete with built in amplifier, wiring loom and even a 75.0mm diameter waterproof speaker!
You simply install the unit in your model and go! There is no complicated PC interface to deal with or complicated set up, you REALLY do just have to plug it in and go!!! Add this to the legendary Mtroniks waterproof construction and you really don't need to look any further!

Listen To The Sound

The digiSOUND sound module for model boats will operate between 6.0 and 12.0V

This first version of the digiSOUND5m is available with a Diesel tug sound effect, more sounds will become available over time, please keep an eye on our webpage for further updates!

Currently available sounds: Diesel Tug

Detailed specification of module and speaker

Module power output: 5 Watts RMS @ 12V (4 ohms), distortion typically 0.1%

Speaker rating: 2.5 Watts RMS (8 ohms), It is possible to run 2 speakers in parallel

Notes on speaker performance.

The 75.0mm speaker included with your module is waterproof so it is safe to use in your model boat, you should always install your speaker into a suitable enclosure (somewhere in the upper surface of the hull) to ensure the best power handling, frequency and bass response.
Speaker systems with a broader frequency response which include tweeters and larger woofers are available as optional extras, please contact Mtroniks for details.

Price:£59.99 (Including VAT at 20%)

Quantity:

MTronik Digisound Small Diesel Tug
Ref: 4680
AS SEEN AT THE BLACKPOOL MODEL BOAT SHOW 2011

Listen To The Sound

The digiSOUND5m is the new marine sound module from Mtroniks Ltd. It is the worlds first 100% waterproof, plug n play sound module designed to take the hassle out of giving your model a realistic sound! The sound module requires NO programming or set up, it comes with a realistic sound pre-installed leaving just the installation to complete before you can get under way! The unit comes complete with built in amplifier, wiring loom and even a 75.0mm diameter waterproof speaker!
You simply install the unit in your model and go! There is no complicated PC interface to deal with or complicated set up, you REALLY do just have to plug it in and go!!! Add this to the legendary Mtroniks waterproof construction and you really don't need to look any further!

The digiSOUND sound module for model boats will operate between 6.0 and 12.0V

Module power output: 5 Watts RMS @ 12V (4 ohms), distortion typically 0.1%

Speaker rating: 2.5 Watts RMS (8 ohms), It is possible to run 2 speakers in parallel

Price:£59.99 (Including VAT at 20%)

Quantity:

MTronik Digisound Napier Delta Diesel
Ref: 4681
The digiSOUND5m is the new marine sound module from Mtroniks Ltd. It is the worlds first 100% waterproof, plug n play sound module designed to take the hassle out of giving your model a realistic sound! The sound module requires NO programming or set up, it comes with a realistic sound pre-installed leaving just the installation to complete before you can get under way! The unit comes complete with built in amplifier, wiring loom and even a 75.0mm diameter waterproof speaker!
You simply install the unit in your model and go! There is no complicated PC interface to deal with or complicated set up, you REALLY do just have to plug it in and go!!! Add this to the legendary Mtroniks waterproof construction and you really don't need to look any further!

Listen To The Sound

The digiSOUND sound module for model boats will operate between 6.0 and 12.0V

Detailed specification of module and speaker

Module power output: 5 Watts RMS @ 12V (4 ohms), distortion typically 0.1%

Speaker rating: 2.5 Watts RMS (8 ohms), It is possible to run 2 speakers in parallel

Price:£59.99 (Including VAT at 20%)

Quantity:

MTronik Digisound Diesel Canal Boat
Ref: 4682
The digiSOUND5m is the new marine sound module from Mtroniks Ltd. It is the worlds first 100% waterproof, plug n play sound module designed to take the hassle out of giving your model a realistic sound! The sound module requires NO programming or set up, it comes with a realistic sound pre-installed leaving just the installation to complete before you can get under way! The unit comes complete with built in amplifier, wiring loom and even a 75.0mm diameter waterproof speaker!
You simply install the unit in your model and go! There is no complicated PC interface to deal with or complicated set up, you REALLY do just have to plug it in and go!!! Add this to the legendary Mtroniks waterproof construction and you really don't need to look any further!

Listen To The Sound

The digiSOUND sound module for model boats will operate between 6.0 and 12.0V

Detailed specification of module and speaker

Module power output: 5 Watts RMS @ 12V (4 ohms), distortion typically 0.1%

Speaker rating: 2.5 Watts RMS (8 ohms), It is possible to run 2 speakers in parallel

Price:£59.99 (Including VAT at 20%)

Quantity:

Mtroniks 155.0mm (6.0 inch) 60W splashproof speaker
Ref: 4683
The 155.0mm (6") diameter rolled rubber surround splashproof speaker is a 60 Watt RMS unit (4ohms),

The weight is 1250.0g and is an ideal speaker for large models and scale loco installs. It has excellent bass frequency response which gives a truly lifelike sound to your model when coupled to one of the Mtroniks digiSOUND sound modules.

Price:£19.92 (Including VAT at 20%)

Quantity:

People who bought this item also bought:

1. Anchor - Aero-Naut/ EN5621/50 (Ref: 64)

2. Anchor - Aero-Naut/ EN5621/30 (Ref: 62)

3. Raboesch Bow Thruster 108 - 30 (Ref: 4690)

4. Rigging Line 0.4mm Pt No 1685 (Ref: 3315)

Graupner Programmable sound module
Ref: 2041
The Soundswitch has been specially developed for RC modelling, and is designed to allow models to generate their characteristic running sounds, varying automatically according to the model's speed. In addition to the running sounds the module can reproduce up to sixteen different supplementary sound effects.
Automatic engine start, accelerate, stop, idle, brake andreversing sounds can also be reproduced. Four sound reproduction channels are available, i.e. a maximum of three supplementary sound effects can be reproduced at any one time in addition to the normal running sounds.
The set includes software which can be used to transfer your own recorded sounds to the module via a PC.
All sounds stored on the module can be modified at any time. Integral high-performance output stage for connection to a3 loudspeaker.
Seven switched outputs are available, for connection to LEDs, lamps, relays etc.; various lighting effects can also be exploited.
The Soundswitch is connected directly to the receiver, and detects the vehicle's running speed in parallel with the speed controller.
Instructions in German, English and French
Program CD
Suitable for use with all expandable radio control systems with more than two channels.
Update-capable via the Internet* Download the instructions

Soundswitch Ship :
Ship's diesel engine with start-up and shut-down sounds. Various horns and typhoon, typical ships signals. Pack contents: program CD with sounds, sound editing software, USB 2.0 lead with mini-B connector, two patch leads, instructions.Specification :
Power supply voltage: 5 - 14 V D.C.
Current drain: approx. 30 mA operating, (sound only) 0.4 A, sound (and switch) 2.5 A
Switched inputs: 5
Switched outputs Proportional inputs: max. 7, each 0.3 A universal, freely programmable
LF amplifier: max. 3 W
Recommended loudspeaker: U 5.9 - 9.6 V : 8 - 16
U 9.6 - 14 V : 16 - 32
Volume control: external potentiometer or RC system
Memory: 4 MB (Flash)
Max. length of sounds: 380 seconds
Number of possible sounds: 75 for running sounds (at full-load)
75 for running sounds (at part-load)
1 start-up sound (automatic)
1 shut-down sound (automatic)
1 shut-down sound (automatic)
1 stop sound (automatic)
1 idle sound (automatic)
1 brake sound (automatic)
1 reversing sound (automatic)
12 supplementary sounds via proportional channels
8 random sounds (random generator)Dimensions :approx. 67 x 44 x 16mm Weight approx. 25 g</p>

"

"

Price:£134.98 (Including VAT at 20%)

Quantity:

Amp For Graupner sound module - Amp For Graupner sound module/2383 Ref: 2039
Amplifier for Soundswitch 1
This amplifier was developed specifically for use with the Soundswitch 1. This amplifier generates a significantly higher volume of sound than is possible with the output stages built into the sound module.

Price:£41.72 (Including VAT at 20%)

Quantity:

Truck Sound Modul Pt No 8268 For Use with F Series Robbe Radios - Robbe/Truck Sound Modul Pt No 8268 Ref: 2780
A sound module for model trucks, containing six digitally stored original sounds. At any time a signal can be superimposed on the engine noise simultaneously, such as the Martins horn, Compressed air release, Air horn, Horn, without interrupting the sound of the diesel engine.
The diesel engine sound varies according to the speed of the drive motor, and features start-up and run-down sound phases. The sound module features an integral 8-channel multi-switch decoder which is used to switch the individual sounds on and off.
A further two multi-switch switched channels are available for any purposes you wish, and can be used for direct control of auxiliary functions drawing up to 1 A (lights, anchor winch etc.). All inputs and outputs are protected against short-circuit and reverse polarity.
The sound module can be used with the earlier 6-channel and the current 8-channel robbe Multi-Switch modules, and also with other makes of similar unit. A powerful, high-volume amplifier stage provides distortion-free reproduction, and the volume is infinitely variable.
A Multi-Switch module must be installed in any robbe Futaba system transmitter to control the sound effects.Specification::
Weight: 65 g Voltage: 6 - 12 Volts
current: 20 - 30 mA
Dimensions: 77 x 48 x 24 mm
more Specification:
Motor connection: -14 ... +14 Volts
Switched power: 1 Amp
Power output: approx. 6 W into 8 Ohms at 12 V
Loudspeaker: 4 - 8 Ohm

Price:£166.96 (Including VAT at 20%)

Quantity:

Navy Sound Modul Pt No 8270 Ref: 2770
Navy Sound Modul Pt No 8270 For Use with F Series Robbe Radios
A sound module for model boats, containing six digitally stored original sounds. At any time a signal can be superimposed on the engine noise simultaneously, such as the Martins horn, foghorn, ship’s bell, typhoon or destroyer siren, without interrupting the sound of the diesel engine.
The diesel engine sound varies according to the speed of the drive motor, and features start-up and run-down sound phases.
The sound module features an integral 8-channel multi-switch decoder which is used to switch the individual sounds on and off.
A further two multi-switch switched channels are available for any purposes you wish, and can be used for direct control of auxiliary functions drawing up to 1 A (lights, anchor winch etc.). All inputs and outputs are protected against short-circuit and reverse polarity.
The sound module can be used with the earlier 6-channel and the current 8-channel robbe Multi-Switch modules, and also with other makes of similar unit.
A powerful, high-volume amplifier stage provides distortion-free reproduction, and the volume is infinitely variable. A Multi-Switch module must be installed in any robbe Futaba system transmitter to control the sound effects.Specification::
Weight: 65 g Voltage: 6 - 12 Volts
current: 20 - 30 mA Dimensions: 77 x 48 x 24 mmmore Specification:
Motor connection: -14 ... +14 Volts
Switched power: 1 Amp
Power output: approx. 6 W into 8 Ohms at 12 V
Loudspeaker: 4 - 8 Ohm

Price:£166.96 (Including VAT at 20%)

Quantity:

Fog Horn Pt No 8300 - Robbe /Fog horn Pt No 8300 Ref: 2040
The robbe foghorn generates the characteristic marine warning signal in electronic form. The pitch of the sound is variable, so that the sound of the foghorn can be matched to the type and size of your boat.

Specification::

Price:£14.87 (Including VAT at 20%)

Quantity:

Robbe Loud Speaker 4 Ohm 80 mm Pt No 8075 - Robbe Loud Speaker 4 Ohm 80 mm Pt No 8075 Ref: 2775
Small, lightweight design, 4 Ohm impedance, matched to the robbe signal system; an excellent choice for a 12 V system.

Price:£6.11 (Including VAT at 20%)

Quantity:

Large Diesel Sound Generator Pt No 8276 - Robbe Diesel Sound /8276 Ref: 2043
This sound generator produces an electronic emulation of the sound of a multi-cylinder diesel engine.
The sound effect is controlled by the drive motor’s speed, so that the apparent engine speed varies with the vehicle’s running speed.
Four ad

Price:£32.30 (Including VAT at 20%)

Quantity:

Loud Speaker 4 Ohm 65 mm Pt No 8076 Ref: 2774
Small, lightweight design, 4 Ohm impedance, matched to the robbe signal system.

Price:£6.11 (Including VAT at 20%)

Quantity:

CalderCraft-Sound modules Steam Engine Sound AE9048 Ref: 2777
The 1.75 x 3.25 circuit board produces the realistic chuff and hiss sound of a steam engine.

The sensor board synchronises the sound speed to the turning prop shaft on your model. Completely assembled with 2 speaker. Operates on 6 to 14.4V

Price:£40.84 (Including VAT at 20%)

Quantity:

CalderCraft-Sound modules Old Steam Whistle - AE9080 Ref: 2771
Identical sophisticated sound device as AE9046 (machine gun) but produces the distinctive ''old time'' steam whistle sound.

Price:£30.62 (Including VAT at 20%)

Quantity:

Calder Craft-Sound modules Air Horns AE9070 Ref: 2038
Identical sophisticated sound device as (machine gun) but produces a dual trumpet air horn sound.

Price:£30.62 (Including VAT at 20%)

Quantity:

CalderCraft-Sound modules Sub Sonar Ping AE9068 Ref: 2779
Identical sophisticated sound device as (machine gun) but produces the clear tracking ping of subs.

Price:£30.62 (Including VAT at 20%)

Quantity:

CalderCraft-Sound modules Ship Klaxon AE9067 Ref: 2776
Identical sophisticated sound device as (machine gun) but produces a klaxon sound.

Price:£30.62 (Including VAT at 20%)

Quantity:

Petrol Or Diesel Engine With Horn Ref: 2772
You choose either a petrol or diesel engine sound with adjustable horn. Engine noise idle rate and top speeds are also adjustable. Simple 4 wire hookup.

Completely assembled, includes 4 speaker. Compact state of the art design synchronised to moto

Please Select

Quantity:

CalderCraft-Sound modules Large Ship Horn AE9071 Ref: 2767
Identical sophisticated sound device as (machine gun) but produces a deep distinctive air horn sound.

Price:£30.62 (Including VAT at 20%)

Quantity:

Calder Craft-Sound modules Large Ship Steam Whistle AE9078 Ref: 2768
Identical sophisticated sound device as (machine gun) but produces a steam whistle sound.

Price:£30.62 (Including VAT at 20%)

Quantity:

Calder Craft-Sound modules Machine Gun AE9046 Ref: 2769
1 x 2.5 circuit board comes with a 2 speaker and operates on 9 to 18V input power.
Can be controlled by the wired mechanical switch and a servo or an electronic switch.
Supplied in loop mode (sound cycles until switch is released) but can b

Price:£30.62 (Including VAT at 20%)

Quantity:

Online Catalogue | Model Boat Accessories | Sound Systems

**sRecentPrefix**				<br/><br/><div class="recenththeader"><input class="recenthtbuttonright" id="scrollbackrecent" type="button" value="    Next >>" onclick="ScrollBackRecent();"><input class="recenthtbuttonleft" id="scrollforwardrecent" type="button" value="<< Previous" onclick="ScrollForwardRecent();"><div style="text-align:center">Recently Viewed</div></div><br clear="all"/><table id="recenthtitem"> **sRecentImageRowPrefix**	<tr><td class="recenthtitemspacer" rowspan=4> </td> **sRecentImageItem**			<td class="recenthtitemimage"><a _HREF_="_SSURL_?PRODREF=_PID_&NOLOGIN=1" ><img border="0" width="75" src="_THUMB_" alt="_NAME_" /></a></td><td class="recenthtitemspacer" rowspan=4> </td> **sRecentImageRowSuffix**	</tr> **sRecentDescRowPrefix**	<tr> **sRecentDescItem**			<td class="recenthtitemdesc"><a _HREF_="_SSURL_?PRODREF=_PID_&NOLOGIN=1" >_NAME_</a></td> **sRecentDescRowSuffix**	 **sRecentPriceRowPrefix**	<tr> **sRecentPriceItem**			<td class="recenthtitemprice">_PRICE_</td> **sRecentPriceRowSuffix**	</tr> **sRecentDeleteRowPrefix**	<tr> **sRecentDeleteItem**		<td class="recenthtitemdelete"><a href="javascript:DeleteRecent('_PID_', true);"><img src="xit.jpg" border="0" /></a></td> **sRecentDeleteRowSuffix**	</tr> **sRecentSuffix**				</table> **sRecentEmptyList**

Sound Systems

Convert

Best Sellers

New Products