Victory Models

Online Catalogue | Static wooden Model Boat Kits  |  Victory Models

Convert

Choose an alternate currency

Vivtory Models are new company from the UK with some interesting new boats coming out over the next couple of years .With CNC cut frames along with lime and walnut planking and decking construction .The fittings are a mix of photo eached brass, Brass, white metal ,Walnut and boxwood
H.M.S Pegasus 1776  Sixth Rate Swan Class Ship Rigged Sloop
H.M.S Pegasus 1776 Sixth Rate Swan Class Ship Rigged Sloop
Ref: 3712
Sixth Rate Swan Class Ship Rigged Sloop

H.M.S. Pegasus was the sixth vessel built of the Swan Class of ship rigged sloop, of which twenty five of the class were built from 1766 to 1780.
Pegasus, as with the entire Swan class was designed by Williams and her construction was ordered by the Admiralty on 1st August 1775 to be built at Sheerness Dockyard. The keel was laid in May 1775 and launched on 27th December 1776.

The Swan class of 6th Rate sloops were unusually attractive for the class of vessel, with not only very sleek hull lines but also the unusual amount of decoration for the size of vessel. They were built just before the
Admiralty issued orders that all vessels (especially lesser rates) were to have the minimal amount of decoration and carvings to save any unnecessary costs, due to the ever continuing war with France and other nations.

There is little remaining about H.M.S. Pegasus’ operational career, but from what little evidence there is, Pegasus was commissioned mainly for convoy escort duty and dispatch duty. Pegasus had a very short operation career, foundering off Newfoundland on 31st October 1777, her sister, H.M.S. Fly also foundered off Newfoundland some years later in 1802.
The Swan Class measured 97’ 7” on the gun deck and displaced 300 tons. They carried 125 officers and men and initially carried 14 guns (later 16) and 16 swivel guns.
The original plans of the Pegasus still exist, and it is with these plans the kit is based upon.






The kit includes the following;
Laser cut wooden parts throughout. Many photo etched brass detail sheets that include window frames, deadeye strop/chainplate fittings, footrope stirrups and other fine mast and yard detail, gunport scuttles, hinges – the list is endless.
Full size plans, which include very easy to follow rigging detail .
The copper plates for below the waterline are of a completely new design. They are so accurate that there is a left and right side to the plates, and there are no unseemly over protruding nail heads, everything is scaled at 1:64th.
Accompanying the plans is a fully illustrated building manual, taking you through every stage of the critical hull construction. There is also a full English instruction booklet, describing every detail of each stage of the main construction, along with histories.


Price:349.00 (Including VAT at 20%)


Quantity:  


H.M.S Vanguard - victory-model-Vanguard
H.M.S Vanguard - victory-model-Vanguard
Ref: 3713
This wonderful kit is the latest release in the highly acclaimed Victory Models series of high quality kits.

HMS Vanguard (or HMS Bellerophon or HMS Elephant). This 74 gun Ship Of The Line was Nelson’s Flagship at the famous Battle Of The Nile on 1st/2nd August 1798.
Nelson's Vanguard was designed by Slade (of Victory fame) and was one of fourteen 3rd rate 74 gun ships which formed the Arrogant class. The ship was ordered on 9th December 1779 and the keel laid down at Deptford on 16th October 1782. During this time, Britain was not at war so her build went ahead very slowly, being launched on 6th March 1787.

The kit includes the following;
Laser cut wooden parts throughout. Many photo etched brass detail sheets that include window frames, deadeye strop/chainplate fittings, monograms and flintlock detail for the cannons, footrope stirrups and other fine mast and yard detail, gunport scuttles, hinges – the list is endless. There are no less that twenty full size plans, which include very easy to follow rigging detail. Sail detail is also included, along with sail cloth if you wish to rig your model with main sails. (Not stunsails)
The copper plates for below the waterline are of a completely new design. They are so accurate that there is a left and right side to the plates, and there are no unseemly over protruding nail heads, everything is scaled at 1:72nd.
Accompanying the plans is a 31 page A3 size fully illustrated building manual, taking you through every stage of the critical hull construction. There is also a full English instruction booklet, describing every detail of each stage of the main construction, along with histories of the three vessels that are included.

Included with the kit are option packs to build HMS Elephant and HMS Bellerophon, as well as Vanguard. There is a set of finely cast figureheads and stern decoration for each version. The plans also include suggested colour schemes for each vessel..
This Kit will feature as with all Chris watton designs many of his new innovations like pre cut gun ports ,3d paneling , photo etched window frame's to mention but a few .


Length O/A - 1171mm Height O/A - 895mm Width O/A - 486mm



Price:682.99 (Including VAT at 20%)


Quantity:  


Mercury Russian 20 gun brig - Mercury Russian 20 gun brig
Mercury Russian 20 gun brig - Mercury Russian 20 gun brig
Ref: 3715
The Russian 20 gun brig Mercury was laid down in Sevastopol on January 28, 1819. She was designed as a patrol ship to guard the Northern Caucasus coast. Built of Crimean oak, with a shallow draught and equipped with oars, the Mercury was launched on 7 May 1820 and broken up on November 9, 1857.

The Mercury fought in many important naval battles during her career; the most notable being when Mercury (commanded by lieutenant A. Kazarsky) and two other ships were sailing back home from the Anatolia coast and faced a large Turkish fleet. Due to light winds Mercury was not able to escape (she was not a rapid ship), while two other russian ships went ahead.
Two turkish SHIPS OF THE LINE engaged Mercury into an apparently hopeless battle, which, however the Russian crew decided to make a bold stand. After few hours of heavy fighting, the much smaller and massively out matched (on paper) Russian brig, maneuvering both under sail and oars, had severely damaged the rigging of turkish ships (dismasting at least one of them) and thus forced them to retreat.
It is recorded that after the battle, a navigator of one the Turkish ships made a comment praising Mercury for her gallantry and strength, and the captain for his bravery;

If in the great deeds of ancient or our times there are the feats of bravery, so this act put the others in the shade and the name of a hero should be wrote by the gold letter in the shrine of glory: the captain was Kazarsky, and the name of this brig was Mercury

Mercury is one of the most famous vessels of the Russian Navy, and Amati have researched this vessel as much as possible to make it as accurate and well detailed as it can be.

The Mercury kit includes laser cut wooden frames, keels and decks; double planking for the hull; metal fittings and brass photo-etched parts. Plans and instructions are included as well as a laser cut wooden stand.

Scale 1:64 - Total Length cm. 80 - Height cm. 60


Price:358.99 (Including VAT at 20%)


Quantity:  


H.M.S Fly - victorymodeles/hms.fly
H.M.S Fly - victorymodeles/hms.fly
Ref: 3711
HMS Fly Circa 1776. Sixth Rate Swan Class Ship Rigged Sloop
The third kit available from Victory Models, a new manufacturer born out of a collaboration between Euromodels of England and Amati of Italy. The HMS Fly assembly kit has all the advantages of innovative design, coupled with the enormous wealth of experience gained over many decades from both companies.

Scale: 1:64, Length O/A: 810mm, Height O/A: 620mm

This Kit is our opion one of the best around at the presant time



Please Click this link to take you a web site for a complete Build on HMS FLY

Price:291.00 (Including VAT at 20%)


Quantity:  


 HM Cutter Lady Nelson 1800 - victorymodels/ladynelson
HM Cutter Lady Nelson 1800 - victorymodels/ladynelson
Ref: 3710
HM Cutter Lady Nelson 1800. Lady Nelson was built at Deptford in 1799 and purchased by the Royal Navy in 1800. She was primarily used for custom and excise duty as she was fast due to her sleek lines. She remained in service until 1825. The wreck of the Lady Nelson can be dived on today just off Babber Island near Timor.
Length: 570mm, Width: 200mm, Height: 510mm, Scale 1:64


Price:124.60 (Including VAT at 20%)


Quantity:  


HM Bomb Vessel Granado - victorymodels/Granado
HM Bomb Vessel Granado - victorymodels/Granado
Ref: 3714
Originally built as a sloop by Thomas Slade, who went on to design Victory, she was converted to a bomb vessel in 1765. As a bomb vessel she performed her duties admirably. The kit has been based upon the original Admiralty plans that still exist and comprises of laser cut wooden parts in birch ply and walnut, very highly detailed photo-etched brass parts together with cast metal decorations and a very comprehensive set of plans and instructions written in English.
Scale: 1:64, Length: 800mm, Width: 278mm, Height: 600mm


Price:268.18 (Including VAT at 20%)


Quantity:  


Online Catalogue | Static wooden Model Boat Kits  |  Victory Models