Electric Motors & Drive Sets For Model Boat

Here I have listed are selection of elecric motors .They very from 4.8 to 24volts choosing the right engine can be a little tricky sometimes so if you are not sure then give us a call on (int 44) 0 1202 763480 or drop us an E:mail and we wil do are best to help

Graupner Electric Motors

Graupner Speed 700 BB Turbo Neodyne Pt No 6306
High-quality SPEED electric motor with neodymium magnets and a 5-segment dynamically balanced armature.
Standard features include ballraces, 1.1 mm thick stator ring and an internal cooling fan.
This new motor also gives outstanding results in electric racing boats with 12 NC cells for the HYDRO II class using a 39 to 42 mm Ø carbon propeller.

Specification
Nominal voltage 9,6 V Operating voltage range 7,2 ... 19,2 V No-load rpm 15750 min–1 No-load current drain 2,17 A
Current drain at max. efficiency 15,93 A Current drain when stalled 117 A Max. efficiency without gearbox 77 % Length of case, excl. shaft 66 mm Diameter 45 mm Free shaft length 7,5 mm Shaft diameter 5 mm Weight 353 g

£49.00

Out Boards

Graupner GTX 800 Speedline Pt No 2337
This outboard motor is designed for medium-sized to large racing and sports boats up to
about 1 m hull length. Power is transmitted from the integral SPEED 820 BB TURBO RACE electric motor
to the propeller shaft by means of metal bevel gears,and the shafts run in V2A stainless ballraces.
The out-board motor is mounted on the boat´s transom by means of four screws.
The hole spacing is the same as that of the OS MAX 21 XM outboard glowplug motor
so the two power plants are easily interchangeable. The mount permits about 12 mm
height adjustment and thrustline angle adjustment of about +/- 10°

Spec
Length approx. 110 mm
Width approx. 65 mm
Height approx. 180 mm
Weight incl. motor approx. 755 g

£154.99

Graupner GTX 650
With a SPEED 600 RACE 7,2 V. This unit is a further development of the GTX-600 outboard motor.
Power is transmitted from the motor to the propeller by means of a flexible shaft running in a Teflon sleeve,
producing a system which is highly efficient and virtually wear-free. The flexible shaft can also be
maintained easily through the maintenance opening. The standard SPEED 600 RACE 7.2 V electric motor is adequate formedium-sized model boats, but other motors of the SPEED 500, 600 and 650 series
can also be installed. The outboard motor is mounted on the model boat´s transom by means of four screws, and its installed height can be adjusted through about 7 mm. The thrust angle can be adjusted
through about +/- 5°. The housing is of generous size, and can easily accommodate a water cooling
coil (Order No. 3324). The coil can be retro-fitted at any time, and the set includes the water inletnipple required for water-cooling.
Length approx. 133 mm

£59.99

General electric motors

Robbe Motors & Drive Sets

Robbe Mini Geared Motors

Compact, low-weight precision DC motors with a gearbox done in veriouse diffrant ratios for special auxiliary functions in model boats, e.g.
anchor winches, radars, guns, cranes etc. Extremely low-noise operation due to the maintenancefree,
self-lubricating sinter bearings. The motors are supplied with mounting screws and a plastic motor
casing for dirt-free and low noise operation.The standered Radar motor is the 500:1 version

Specification
Weight: 14 g Length: 23.5 mm Width: 17 mm Height less shaft: 17 mm
Shaft diameter: 2 mm Operating voltage:´4.8-6 V max. current consumption: 50 mA Gearbox loading: 220 Ncm

Please use the dropdown list to select the right ratio

MINI GEARED MOTOR 6V 100:1 ... £28.85
MINI GEARED MOTOR 6V 500:1 ... £25.98
MINI GEARED MOTOR 6V 1000:1 ... £25.98
MINI GEARED MOTOR 6V 250:1 ... £30.01

Please Note Prices are subject to change without notice

Westbourne Model.co.uk
Is owned and run by
Westbourne Model Centre
41 Seamoor Rd Westbourne Dorset
BH4 9AE Tell/Fax + 44 (0) 1202 763480