Graupner Model Boat Radio Control Sets

A small range from The Graupner Nautic Radio Series .These radios can be expanded by using the nautic moduals and switches To give an radio that will grow as your requirements grow

MC-19s Computer system 40 MHz Pt No 4719

Description:
Twenty model memories
Synthesizer channel select with security menu to avoid the transmitter being switched on accidentally
Selectable modulation types: SPCM, PCM 20, PPM 18, PPM 24
Twelve control functions: simplified method of assigning control elements such as primary sticks, external switches, proportional controls and trim levers as transmitter control functions for multi-function model boats and cars, without the need to install external switches or switch modules
Future-proof: update-capable operating system
3-D Rotary Encoder in conjunction with four programming buttons for easy, convenient and accurate setting of values MULTI-DATA GRAPHIC LCD monitor: high screen resolution for accurate monitoring and precise graphic display of curves and characteristic lines
Real Time Processing (RTP): settings and changes take place virtually in real time ADT (Advanced Digital Trim System)
CONVENIENT MODE SELECTOR: simple method of switching stick modes 1 - 4 (e.g. throttle right / throttle left)
Three freely programmable mixers for RC model aircraft, helicopters, boats, cars and trucks
Three-point mixers for throttle, collective pitch and tail rotor, plus gyro offset. These settings can be entered separately for each flight phase
Dual Rate / Expo for Ch2 - Ch4 (switchable in common for each channel)
Phase trim according to model type: camber-changing flaps, ailerons, elevator Comprehensive mixer menu with twelve set-up programs
Servo travel settings for twelve servos, servo reverse, servo centre, servo travel, variable separately for each side, graphic display for all servos
Fail-Safe programmable for PCM / SPCM
Two switch-operated timers, stopwatch and Total time / running time
HELP BUTTON with notes relating to the currently selected programming menu
Trainer system with total control transfer; all settings entered at the Teacher transmitter
Nautic control function for operating the Nautic Expert module
Model copy function for all model memories

Set contents:
mc-19 micro-computer transmitter with integral NiMH transmitter battery, transmitter RF module on the appropriate frequency, C 17 miniature narrow-band FM receiver on the same frequency band, C 577 servo, switch harness, pair of crystals on the appropriate frequency band.

Specification: Transmission system: SPCM 20 / PCM 20 / PPM 18 / PPM 24 selectable
RF module: Integral transmitter Synthesizer module (35 / 35 B-band, 40 / 41 MHz band)
Channel spacing: 10kHz
Control functions: SPCM= 10, PCM= 10, PPM= 9, PPM 24= 12
Basic control functions: 6 functions
Control channels: 10
(4 proportional with trims, 6 proportional or switched) plus 2 software control functions
Channel pulse width: 1.5 ms + 0.5 ms
Servo travel resolution: SPCM 20 10-bit (1024 steps), PCM 20 9-bit (512 steps)
Temperature range: - 15 ... +55°C
Telescopic aerial: 10-section, approx. 1470 mm long
Operating voltage: 9.6 ... 12 V
Current drain approx. 40 mA (excl. RF module)
Dimensions approx. 225 x 215 x 70 mm

Weight approx. 900 g excl. trans

£539.00

MC- 22s Computer System 40 MHZ
Product information Micro-computer radio control system exploiting the latest technology for up to 10 control functions (SPCM) (PPM 24: 12 control functions).
Multi- function menu for RC fixed-wing model aircraft, helicopters, boats and cars / trucks Professional high-technology micro-computer radio control system.
With Ultra-Speed Low-PowerSingle-Chip Micro-Computer, 256 kByte (2Mbit) flash memory, 16 kByte (128 kbit) RAM, 73 ns operating cycle! With integral high-speed precision A/D converter and new type of dual-function encoder with 3-D Rotary Select programming technology.
- World's first: four-language dialogue menu (German, English, French, Italian)
- The latest hardware and integrated Synthesizer system for channel selection, with security menu to prevent the user switching the transmitter on accidentally - 12 control functions (PPM 24). Simplified assignment of sticks, external switches, proportional controls and trim levers as control functions - Update-capable operating system for a future-proof transmitter
- 30 model memories, the latest back-up system requiring no Lithium battery
- Dual-function encoder in conjunction with four programming buttons for accurate settings and superb programming convenience - CONVENIENT MODE SELECTOR for easy switchingbetween stick modes 1 - 4 (e.g. throttle right / throttle left)
- High-resolution MULTI-DATA GRAPHIC LCD screen ensures accurate monitoring and precise graphic display of multi-point curves for throttle, collective pitch, tail rotor, EXPO / DUAL RATE and mixer characteristic curves.
- Real Time Processing (RTP). All settings and changesare effective at the receiver output virtually in real time. ADT Advanced Digital Trim system for all four stick trim functions, with easily changed throttle / idle trim.
Specification :
Transmission system: SPCM 20 / PCM 20 / PPM 18 / PPM 24, switchable
Synthesizer RF section: 35 / 35 MHz B-band or 40 / 41 MHz band
Channel spacing, Synthesizer: 10 kHz
Control functions, max. SPCM = 10 / PCM = 10 PPM = 9 / PPM 24 = 12
Control functions, standard: 6 functions, 4 with trims
Channel pulse width: 1.5 ms + 0.5 ms
Telescopic aerial: 10-section, approx. 1470 mm long
Operating voltage: 9.6 ... 12 V
Current drain approx. 40 mA (excl. RF module)
Dimensions approx. 225 x 215 x 70 mm
Weight approx. 900 g

Sets Contents :
mc-22s micro-computer transmitter with integral NiMH transmitter battery, six control functions, expandable to max. ten channels, Synthesizer RF module on the appropriate frequency band, R16SCAN PLL Synthesizer FM receiver on the corresponding frequency (8 servo functions), one C 577 servo, switch harness.

£675.00

Accessories

Graupner Regatta Winch Pt No 5172
Product information :
The sailwinch REGATTA complies with today's variety of requirements which have to be met fully by a modern powerful sailwinch.
Being especially designed for competition work, this sailwinch meets the most stringent requirements. Thanks to application of the very latest technology this winch has been configured for a wide spectrum of operation. High torque, fast winding speed and precision resolution permit uncompromising use
in racing yachts. Thanks to its low weight and diminutive dimensions the sail winch is also ideally suitable for small
sailing yachts, such as RUBIN. Depending on the kind of operation current supply for the receiver may be branched off a separate sailwinch accumulator (6-7.2 V), eliminating the need for a receiver accumulator and reducing the weight, for example (BEC system).

The unit comes with permanently installed switch leads for the sailwinch and BEC system for turning off the supply voltage.
Alternatively a two-battery system may be used or the sailwinch may be operated just like a normal servo on 4.8 V ex the receiver accu.
Thanks to a choice of vertical or horizontal installation and a separately adjustable winding travel of 1.5–5.5 rotations the winch can be accurately adapted to prevailing model yacht requirements. Robust metal gears. Ballraced output shaft.
Powerful hi-performance motor. Latest hi-performance IC electronics. Adjustment of winding travel. BEC system. Spraywater-protected.

Specification :
Operating voltage 4,8 V
Max. current drain, approx. 1,2 A
Torque 53 Ncm (5300 cmg)
Transit time 1 s/rotation
Holding current approx. 20 mA
Working current (idle), approx. 260 ... 310 mA
Winding range 1,5 ... 5,5 revolutions
Winding travel 18 ... 65 cm
BEC system 5,5 V/0,5 A
Drum Ø, approx. 38 mm
Dimensions (excl. flange) approx. 46 x 42 x 23 mm
Weight with lead approx.90 g
Operating voltage 6 V
Max. current drain, approx. 1,6 A
Torque 79 Ncm (7900 cmg)
Transit time 0,8 s/rotation
Holding current approx. 20 mA
Working current (idle), approx. 260 ... 310 mA
Winding range 1,5 ... 5,5 revolutions
Winding travel 18 ... 65 cm
BEC system 5,5 V/0,5 A
Drum Ø, approx. 38 mm
Dimensions (excl. flange) approx. 46 x 42 x 23 mm
Weight with lead approx. 90 g
Operating voltage 7,2 V
Max. current drain, approx. 2 A
Torque 100 Ncm (10000 cmg)
Transit time 0,65 s/rotation
Holding current approx. 20 mA
Working current (idle), approx. 260 ... 310 mA
Winding range 1,5 ... 5,5 revolutions
Winding travel 18 ... 65 cm
BEC system 5,5 V/0,5 A
Drum Ø, approx. 38 mm
Dimensions (excl. flange) approx. 46 x 42 x 23 mm
Weight with lead approx. 90 g

£131.60

Please Note Prices are subject to change without notice

Westbourne Model.co.uk
Is owned and run by
Westbourne Model Centre
41 Seamoor Rd Westbourne Dorset
BH4 9AE Tell/Fax + 44 (0) 1202 763480