|
|
|
|
A small range of boats from this famous German company. The
river launches are ideal for steam plants, with ABS hulls,
brass fittings, die cut timber, plans and English
instructions.
Nb Some kits have Fittings kits as an extra we
have included them in the price where necessary |
 Victoria
Built in 1912 by Messer's Simson Strickland & Co. the
Victoria epitomizes the era of steam at the beginning of the
20th Century with the enclosed cockpit and open deck to show
the steam plant in all its glory.
The kit is based on a high quality ABS moulded hull with the
majority of the superstructure from laser cut timber. An
additional fittings kit with the following parts is
available: fenders, bollards, flags, sun struts and
boatswain
£306.99 |
 Borkum
Open steam launch. fitting set - includes 2 figures
1/10th 900mm
£294.94 |
 Alexandra
We have managed to create a typical steam launch
from the beginning of the century. The slim hull shape
reminds us of this time that brought us so many elegant
boats.
This kit is of outstanding quality. All plywood parts have
been laser cut. Moulded from 1.5mm ABS, the hull is
extremely strong. Propeller and shaft are also included. A
separate fittings kit is available to complete the model
including: 1 table lamp, 1 compass, 2 hand lamps, 1
boatswain, 6 side fenders and a bow fender
£260.99 |
 Anna
Is a small open launch, the ideal for introduction to steam
sailing.
The hull is vacuum formed ABS, all timber work is CNC cut
making this a very easy model to construct, the figure and
fenders are additional accessories
£101.95 |
 Grimmershörn
The Motor vessel 'Grimmershorn' was built in 1956/57 by
Hansa Stahlund Schiffbau GmbH at Koln-Deutz for the
Waterways and Shipping Administration at Cuxhaven.Her
Daimler-Benz four stroke diesel engine had an output of
500hp. permitting a speed of 11.5 knots.
The model hull and deck are vacuum formed ABS, timber work
of precision cut ply, 2 full size plan sheets and a
construction manual along with a fittings pack complete this
kit
£216.99 |
 U25
Is based on a Type 1a submarine built in 1936 by
Weser Ag in Bremen. She was 72.4m long and carried 6
torpedoes.
The model is based on a bread and butter hull construction
with a vacuum formed deck CNC cut. Diving is by the dynamic
system using the diving planes. The kit is complete with
motors, prop shafts and props
£282.00 |
 Sirius
Was based on an original Shrimp cutter stationed at Dorum, a
small port just North of Bremerhaven.
The kit comprises of a one piece vacuum formed ABS hull, a
fittings set including the winch which is manufactured in
brass as is the majority of fittings. Precision cut ply
parts, net material, wood, dowel, brass tube and wire help
make this a superb kit. Very detailed full size plans and a
comprehensive instruction manual make this kit a pleasure to
build and sail
£286.00 |
 Nordstrand
Is a freelance model of a fishing yacht.
With a vacuum formed ABS hull and superstructure, die-cut
timber and plastic parts and fittings as shown in the
photograph. Two full size plan sheets and a detailed
instruction manual. This model is an excellent on the water
performer and ideal as a regatta model
£145.95 |
 Gulnara
Is a perfect example of the transition from sail to steam,
making this model an interesting and unusual subject. As
with most ships of this period, she was built in England in
1834. She was bought by the Sardinian Navy for escort and
mail duties.
The kit features die-cut keel, bulkheads, deck and paddle
housings. Double plank on frame construction in lime and
walnut. Deck planking, brass funnel davits and stanchions.
Photo etched brass funnel top and shroud straps, all
necessary cordage in black and natural hemp, walnut blocks,
deadeyes, silk flags, wood dowel, cast stern windows,
anchors and figurehead. Very detailed full size plans and
comprehensive instructions are included. Sail sets are
pre-stitched and available separately
£210.95 |
| |
|
|
|
|
